Garruk's Helmet - Magic: The Gathering
Garruk's Helmet - Magic: The Gathering
3D
Published 2022-12-12T15:37:58+00:00
This is a demo model, the full model set can be found here
https://www.aguilarworkshop.com/product-page/garruk-s-helmet
Plated Armor Design
This helmet is mainly comprised of three main "plates", that are held together on the sides by small pins that fit inside the tusk sockets on the sides. This allows the helmet to be put together before glue is applied, to easily visualize and verify the end product is what you want.
The tusk need to be glued into their sockets and the plates and their pins should be glue to ensure a strong hold in the helmet.
Sizing Ring
This helmet also comes with a sizing ring that will let you know whether or not the helmet can fit onto your head as is or whether it needs to be scaled up or down.
Personal Commission
This model was commissioned by an individual and later released for everyone. Contact me about your own commission ideas before someone else jumps ahead of you in my queue!!
| Date published | 12/12/2022 |
