SPRINGO FRUIT!!!! v6 (Tippi Tree ornament design competition)
SPRINGO FRUIT!!!! v6 (Tippi Tree ornament design competition)
Published 2022-12-12T15:32:37+00:00 • Remixed from Tippi Tree Ornament Tool (Tippi Tipmas Tree Contest)
Introducing the SPRINGO FRUIT!!!
Tippy Tipmas everyone!
I drew inspiration from the original berries and sprigofy'd it.
*That should be a word*
This is version 6. I made the coil stronger, made the coils easyer to seperate, made the pet easier to print, and made the stretch of the coil when hanging, consistant.
Designed in Fusion 360
Use a print spatula to seperate the coils after printing. Prints upsidedown with a brim. NO SUPPORTS! *yay* (Follows all of the Tippi Tree Ornament Design Competition Rules)
Happy Printing!
Stems and Berries 3D printed on the Prusa i3 MK3S+
Printed in Silk Red, Silk Green, Silk Gold, and Silk Brown PLA filaments from Overture 3D.
Designed by myself on Fusion 360
Date published | 12/12/2022 |
Time to do | 194 - 196 minutes |
Material Quantity | 19.65 |
Dimensions | 30x30x55 |
Technology | FDM |
Support Free | YES |