Transformers Quintesson Prosecutor

And joining the ranks of the Quintessons in their crazy cosmic court - here's the Prosecutor!

This little dude floats about on a little provided effect stand, and similar to the earlier Scientist, his tentacles come printed out as straight rods which need to be heat-bent into any pose you like!

On his back, we took the chance to design in a 5mm port which is perfect for adding on effect parts or holding small accessories.

As a comparison, here's the Prosecutor together with the earlier Scientist, and of course with the rest of the Quintesson family!

=== Assembly ===

The included diagram shows the parts of this build and how they are to be assembled.

This piece's entire body is connected using the central peg.

His face, being probably the most complicated part to print, has been designed separately as a smaller piece so it can be printed in resin or with higher settings in FDM to give it the best results. The face piece then can be glued to the head piece, optionally using a short segment of filament to help position it.

===
Hope everyone has fun adding this wacky little character to your collections, happy 3d printing! =)

===

This model is not to be uploaded or sold in any form and is intended for personal use only.

Check out more of what we are up to over at our Facebook Page (http://www.facebook.com/FunbieStudios) or website (http://www.FunbieStudios.com/)

Support us on Patreon - https://www.patreon.com/FunbieStudios | Full listing of Models - https://funbiestudios.com/model-catalog