Nintendo switch base with lock - Nintendo switch safe

A friend asked me for a locking base for his Nintendo switch.

I drew him this design with lots of little facets reminding the mesh of old video games.

This base allows to incorporate the charging station of the Nintendo switch as well as the console.

It is possible to put on and take off the controllers without any problem.

There is the passage for the cables and the access to the USB sockets is kept.

There is the possibility of putting 1 or 2 "lockers" the first locks the console on the base and the second locks access to the game card. The whole thing is to be locked with padlocks or a cable.

Finally, at the back of the base, there are still rings to secure the base itself with a padlock or cable.

On the front of the model, I positioned a flat, empty rectangle. The goal is to incorporate a personalization, first name, logo, drawings... Be creative For this, I added in the package the base on which to make the customization and that you must then paste on the flat rectangle.

The whole thing prints easily and without support.

In the pack you have :

- The base

- The locker to be printed 2 times

- The base to make the personalization (to stick on the base)

Discover another of my creations:

[creation adaptor-vive-audio-strap-on-occulus-rift-s]

Dhemonaq

Stackable chip bowl - Stackabe Game Token Bowl

• 6.5k views
• 12 likes
• 68 downloads
• 0 collections
• 0 comments
• 0 makes

Download US$1.34

Filament Ø1.75mm

nozzle Ø0.4mm

support: no

Adhesion : Skirt or nothing

Printing speed: 80mm/s

Filling: 15%.

Printing time : 12h (base + 2 lockers)