EJECTOR SEAT 3 - MARTIN BAKER MK-4

UPDATE: 12-03-2023 , seat with a single ejection ring , there were some variants in this model and this is the one that was missing; at the request of a buyer today we attend his request.

Scale 1/18.

Efran.

New ejector seat!!!, Martin Baker MK-4 model, one of the most demanded model in the 1950s until the 1970s, the British company has put this MK-4 model in most of the aircraft in the world!!!.

This model attracted my interest in particular, due to a request from a buyer here at Cults, and doing some very thorough research I decided to reproduce it as faithfully as possible.

I am attracted to ejector seats, but had not noticed this particular model.

The print scale is 1-18 (with reference to fighter pilot #3), it is printed in several parts for easier assembly.

This seat model is complemented with the fighter pilot N°3, found here in my gallery, but respecting the freedom of users to independently choose each model I have them separately, according to the requirement of each project.

I hope it will add to your RC Aircraft or Model Aircraft models; I know that your imagination will be compensated by this model.

In some photos you can see the N°3 seat and fighter pilot, for reference.

Any questions or customization, do not hesitate to contact me, it is always a pleasure to serve you.

Visit me on Facebook and Instagram.

Efran

16/12/2022

Printing parameters: reference according to printer type

Filament: PLA

Filling density: 50%

Layer height: 1

Frame thickness: 2 (enhances details)

Detail threshold: 0.02 (refines output printout)

Parts: 6 STL FILES

Development: 3DMax.