Solenia organizers

Comfortable organizers for Solenia board game.

The set contains Resources organizer and Other organizer.
RESOURCES ORGANIZER is semicircular container. There are 2 bands, 4 section each. The inner band is dedicated for 4 types of wooden resources: wood, wheat, stone and water, the outer one accommodates 4 types of star-shaped tokens: 1, 3, 5 and 10. Rounded bottom facilitates resources draw. 2 of such organizers should be 3d printed. Thus they can be placed on 2 sides of the table during the play, so all players can comfortably reach for components.
OTHER ORGANIZER accommodates other components of the game. There are different sections dedicated for different items: 4 slots for cards, 1 section for Airship + die, 1 slot for level-1 Improvement tiles, 2 sections for level-3 Improvement tiles. Sections for cards and bigger tiles have sloped back walls to facilitate taking them out. Sections for smaller tiles have rounded bottom to facilitate the draw. It is adjusted for cards without sleeves.

Dimensions:
222 x 111 x 23.1 mm - Resources organizer
222 x 106 x 46.1 mm - Other organizer
Dimensions are adjusted to the space inside the game box after removing cardboard insert. Containers match one to another to fill the space in the box next to 2 textile bags for Delivery tiles, Day and Night separately (I use 14x20 cm bags from mepel.pl - MEPEL013). All items fit the game box very well and provide quick game setup. However it's not an insert.

Some photos in higher resolution:
The set
Resources organizers
Other organizer
Packed

All organizers were 3Dprinted on Prusa MK3:
- in PLA (F3D Blue pearl),
- No support is needed,
- Infill 10% rectilinear.
I use slightly changed default Print settings "0.15mm SPEED MK3" in PrusaSlicer.

Printing Time (for one organizer of each kind):
7h7' - Resources organizer
11h41' - Other organizer