Toyota 22RE (8/8) / Hubcap Wheel add-on

These are Hubcap Wheel for the 22RE Toyota Engine (https://www.thingiverse.com/thing:644933).

IMPORTANT
If you want to purchase all the add-ons of the Toyota 22RE engine, I recommend that you follow this link to download the complete add-ons package which allows you to benefit from a 20% discount on the total purchase price.

This is an add-on for "Rear axle housing for open differential toyota third member" (http://www.thingiverse.com/thing:1344938).
It maintains the drum backing plate in position.

The video of the final project : https://www.youtube.com/watch?v=Oly5FVFVWa0

Print Settings

1 x HubcapWheel1: Layer:0.15mm Raft:no Support:no Infill:15%
1 x HubcapWheel2: Layer:0.15mm Raft:no Support:no Infill:100%
1 x HubcapWheel3: Layer:0.15mm Raft:no Support:no Infill:100%

Accessories

N/A

Assembly

/!\ The Hubcap Wheel is insert on 3mm rods which must exceed 10mm from the axle flanges (look at the picture Img_2958.jpg). The 3mm rods must not exceed the drum backing plate (look at the picture Img_2959.jpg).

Before mounting, you can make a Post-Printing on HubcapWheel2 ; for exemple, i painted the background in white and the top letters in red.

Glue HubcapWheel1 on HubcapWheel2 ; insert a 3mm screw to center the two pieces.
Glue HubcapWheel3 on HubcapWheel2.
Insert the Hubcap Wheel on 3mm rod to maintain the drum backing plate in position.

More add-ons
https://cults3d.com/fr/collections-de-designs/dancan13f/toyota-22re-engine-add-ons

-