Simple M16 Buffertube for Mini Adder v2

This is a simplyfied version of an M16 Buffertube matching the Mini Adder v2.

In order to make it simpler to print a "Buffertube" I simply remixed the Airsoft stock referenced in the Mini Adder build document (https://www.thingiverse.com/thing:2398544) and added a slightly different "head" for direct mounting the stock to an Mini Adder v2. Now you simply need to print out the part, glue in a 60 mm long piece of 20x10 mm tube and you are set to go. No multi part print, no glueing, etc.

Of course this version is neither foldable, nor adjustable. The single part version (Buffertube_full.stl) will fit on the print bed of an Ender 3. Fx8x25 mm springs laying around.

This buffertube (similar to the one included with the Mini Adder) will fit most AR15 / M16-compatible stocks out there.

For printing I would not to nuts. Any quality PLA will do. Use some decent perimeter setting (more beefy like 1.6 mm+) und at least 30% infill. 0.2 mm print quality (similar to the Adderini) will do.

Beside the Airsoft stock referenced in the Mini Adder build document (https://www.thingiverse.com/thing:2398544) you can either sniff around here at Cult3D where you will find some matching parts like this:
https://cults3d.com/en/3d-model/various/stock-m16-ar15-m4-motion-airsoft

Or simply search other 3D model sites such as thingiverse. There seem to be a ton of matching stocks for Nerf and Airsoft guns.

Have fun and stay safe !