Star Wars YT-2400 concept. (Stl files for 3d printing)

Hi, this listing is for a set of files to 3d print my concept YT-2400 from Star Wars.

The model consists of 31 files and is 1/72nd scale. These files are made to be printed on a large 3d printer. I used a cr-10 v2 to print mine.

You can scale the files any way you like and use a resin printer too.

Scale is approx. 1/72 and the model, when built, is 392mm wide or 15.4 inches.

It uses landing gear so there is no included stand. The turret has a pin that is a very tight fit by design,

(I added a new turret with a ball socket joint instead of the pin for a much easier assembly, its the second zip file)

I recommend using a round pin file to gently smooth out the holes in the gun mount and lightly sand the pin itself. I've included a stand alone pin file incase you break one.

The pictures of the finished model are of my personal build and is not what you are buying and is not for sale.

Most parts are friction fit but may or may not need a little sanding depending on the tolerances of you 3d printer.

Disclaimer.
You are purchasing files, not the actual model!!
This is a virtual kit.
The Stl. Files you are purchasing have been used to build the model in the main picture.
Due to printer and material differences you may need to make minor adjustments on the fit of parts.
These files are for personal use only and are the intellectual property of NovaDenied and must not be re-sold for profit, or the parts used for re-casting or printing for others.