Rosy container

A fabulous container decorated with roses.

The set contains: container, lid and rose.

Circular container is 70 mm in diameter and 48 mm high - that's its capacity. On the outside it is decorated with rose leaves. 6 pyramidal joints are arranged around the container for roses to be attached. The lid fits the container - it is just placed on it. The lid has decorative cutouts and wavy wall around the edge. In the middle there's a pyramidal joint for the rose to be attached. This rose will function as a handle.

7 roses must be 3d printed and later glued to the pyramidal joints on the container and the lid. The rose has an indentation related to the joint. This way the gluing area is bigger and items stick one to another better. There is just one model of the rose, but it can be positioned in 4 directions, so this small diversity works well enough for the whole container perception - as you can see on the pictures.
Roses are 3d printed separately to avoid supports.

Some photos in higher resolution:
Closed
Open
Not closed ;)
Opening

As always, everything is designed in Blender.

It was 3d printed just in one color, but you can use different ones. Some screenshots from blender to get the idea.

All items were 3Dprinted on Prusa MK3:
- in PLA (F3D Gold pearl),
- No support is needed,
- Infill 20% rectilinear.

Note1: I use slightly changed default Print settings "0.15mm SPEED MK3" in PrusaSlicer.
Note2: Use Monotonic top fill for the lid to increase its quality.
Note3: I used brim 2 mm wide for rose just to be sure the bottom sticks well and the model don't fall down, but maybe it's not necessary.
Note4: The container dimensions are: 197 x 194 x 50 mm.

Printing Time:
14h46' - container
3h30' - lid
3h42' - one rose