My Little Centaur - Applejack - MLP

Applejack is the first in a series that I'm working on of mixing my articulated centaur design with My Little Pony. I knew I had to do this mash-up as soon as I made my first centaur. I'm planning on making Rarity next. ^_^

I wouldn't go lower then 75% when printing her. The walls on the peg might become to thin and create holes to the inside. The part that rotates could become fused when its glued if you're not careful. If you don't want the tail to move and would rather glue it in place, then going smaller shouldn't be an issue.

The middle of the saddle bags are the only thing that needs supports. Everything else is good without them. We didn't use a brim on tail, but you can if you have issues with it not sticking.

Filaments used:
3DSolutech - Real White
BBlife - Lime Green

Hand painted with Apple Barrel acrylic paints.

Please feel free to share images of your prints, I would love to see them! ^_^

! For personal use only! You may not redistribute or sell my files in any way!

If you are interested in selling 3D Printed items (not files) of my work, visit my Patreon for a commercial license and other perks: https://www.patreon.com/MysticSaige

!Not Intended for small children!

Print in Place with some assembly - Supports only needed on the middle of the saddle bag!
3+ perimeters (the more the stronger it will be).
15%+ infill.
Make sure to enable bridge settings.
Great in PLA.
Make sure to have good bed adhesion or a brim

!! Use strong glue to attach the pieces together once printed.