Anycubic M3 Autofill Bottle Adapter

So i'm loving my Photon M3 Max autofill/autofeed feature with the exception of the cap. Its built in a way that it wouldn't be very easy to move the parts over to a new customized cap and i find myself using Siraya Tech resins almost exclusively as i have much better success rates with their resins. The Siraya Tech resin bottle does fit in the tray, so i figured i would make an adapter for the wide mouthed Bottles make by Peopoly/Siraya Tech with a smaller male thread on top of it so the Auto Fill cap can screw on top. So far its working out just fine, the prongs dont reach all the way to the bottom of the jug but that hasnt bugged me enough yet to redesign this so the cap sits lower.

I dont know which resin i will be printing with next so i just used an anycubic cap for the images, You get the idea! I've attached screenshots of the supports i used for my prints. One i set on the build plate with some supports pulled away from the body, and another completely on supports, both printed successfully.

Also, The printed STL i used in the images above, the Siraya threads were perfect but the anycubic/elegoo cap threads were a bit tight, so i've loosened that up a bit, no need for me to re-print it as i just filed mine down. SO those should fit even better than in the images above.

-