Custom for chiappa little badger 22lr / 17HMR

accessories for custom chiappa little badger rifle in 22 lr / 17HMR

the handguard with picatinny rail on top

the stock with 6 bullet slots

the butt plate

the cheek rest adjustable in height

bolt covers

the flame cover

The whole thing is plug and play, you just have to print, paint if you want and mount it on your chiappa. You will just need 4 M4 nuts and 4 M4x10 bolts

To mount the handguard:

Unscrew the small BTR screw that is located on the top of the front sight to remove the latter towards the front of the weapon.

Remove the 4 picatinny rails from the original handguard

Slide the new handguard towards the front of the weapon

Screw the new handguard with the screws of the old picatinny rails to the provided locations.

Put back the front sight and its small BTR screw

For the stock:

Unscrew the Torx screw on the right side of the weapon behind the trigger

Remove the 2 metal rods that serve as a stock

Fit the stock print in the chiappa

Put back the Torx screw

Insert the butt plate from above

Stick the 4 bolts into the printed bolt covers

Insert the 4 nuts into the slots on the top of the stock

Put the cheek rest in place and tighten it with the bolts

The flame arrestor has a 1/2X20 TPI thread to screw it to the end of the barrel

The stock file has 2 versions, one with the whole stock and the other version with the stock in 2 pieces to print it on ender 3 type trays

Article links :

M4 nuts :

https://www.amazon.fr/sourcing-map-acier-%C3%A9crou-argent/dp/B07JHFPHSC/ref=sr_1_3?__mk_fr_FR=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=ecrou+m4&qid=1613683893&s=hi&sr=1-3

M4x10 bolts:

https://www.amazon.fr/AERZETIX-Hexagonale-Bricolage-dassemblage-Quincaillerie/dp/B08X4QCPPV/ref=sr_1_12?__mk_fr_FR=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=189KYPGZJISPU&keywords=m4x10&qid=1653059355&s=hi&sprefix=m4x10%2Cdiy%2C59&sr=1-12&th=1

Printed in PLA

0.4 mm nozzle

layer height 0.2 mm

25% filling