Animatronic eye module

Ideal module for animatronics eyes

for servo 3.7Gr

everything is to be assembled with wire (semi rigid)

the eyes are to be glued on the support to make it easier to work them

the arduino codes are easily found on the net (depending on if you want a joystick or simple movement)

for any support or size request do not hesitate

210° nozzle (pla)

bed 60° (pla)

Infill 15% (optional)

30mm/s (cartesian) / 70mm/s (delta)

0.15 layers

The final result depends on several factors:

of your machine (personally I have a u20 & an anycubic predictor)

of your slicer

your print settings

the print size of the template

I create them in 25cm long if you change the format (size) and your machine is not able to print or you do not adjust according to the details this is not my responsibility and does not come from the STL file!!!

Any purchase of the STL file allows you to print at will

Any resale or sharing of the file is strictly prohibited

EN.

210 ° nozzle (pla)

bed 60 °

Infill 15% (your choice)

30mm / s (Cartesian) / 70mm / s (delta)

0.15 layers

The final result costs several factors:

from your machine (personally I have a u20 & an anycubic predator)

of your slicer

your print settings

the print size of the model

I create them in 25cm long if you change the format (size) and your machine is not able to print or you do not adjust according to the details this is not my responsibility and does not come from the STL file !!!

Any purchase of the STL file allows you to print at will.

Any resale or sharing of the file is strictly prohibited.