CELL PHONE HOLDER - SWISS KNIFE STYLE v2

NOTE: PA1© - FOR FULL ACCESS TO ALL MY MODELS, + EXCLUSIVE STLs AND A COMMERCIAL LICENSE FOR SELLING YOUR PRINTS, YOU CAN JOIN MY PATREON HERE:

https://www.patreon.com/PA1_MAKER

A cool pocket swiss knife cell phone holder... In fact its not a knife at all, its a compact cell phone holder in the shape of a swiss knife... Don't be fooled!!! :P

I tought i'd make another useful design, while being inspired by this iconic object i had in my life for the past 30 years... Already made a first version long time ago, but this one is upgraded and a bit different.

So here ya go! Swiss knife inspired cell phone holder V2... Fits easily inside any pocket, can be hooked to a carabiner/backpack and super stable with his large base.
You can print them in any color you like.

Everything is easy to print, and only two set of parts required supports (buildplate only). They have the mention "W SUPPORTS" in their file name. Its the main body and the two back braces.

The parts are already placed on the bed in the best orientation.

You will need some screws to complete the assembly:

-COUNTERSUNK M4x12mm (4x) (for the side trims)
-M3x12mm (4x) (for the moving parts)

Because the holes are self threading, you can use imperial equivalents if you want with no problems (like 8-32 and 6-32). ;)

Assembly instructions included. (3 exploded views)

Have fun!!! If you have any questions, send me a message! :)

Use at least 4 walls. Holes are self-threading, so to prevent any cracking or layer splitting, use 4 walls.
Infill: 10% is enough