Townhome Dice Tower with Dice Jail/Bar area

I think this dice tower design is just so unique and cool; especially the "dice jail" on the roof terrace (i.e., the outdoor bar). If one of your dice isn't behaving, just remove the bar's roof and toss it in there for a while. Maybe a few drinks is just what it needs ;)

I broke up this project into 6 print jobs which is really great because it makes a number of sections like the garage and 2nd floor patio much easier to paint.

Here's my youtube channel and playlist for this design: https://www.youtube.com/watch?v=lsbYwrKcQM4&list=PLVPUMh031xXVSp9Jd1bAobSIdlMSYdJjJ

The last file includes lots of goodies to add to your dice tower.
1) Garage Level: This is where the workbench with pegboard, the shelves and refrigerator go there is also a hose you can attach on the outside of the house near the driveway

2) 2nd Floor Patio: There's room for one of the chairs, one of the round tables, and the beer cooler. Then of course there are the two guard rails for the patio area.

3) Roof Terrace: Here you can place the other two chairs and table, along with the bar stools

Backstory: This started as a daddy daughter project. I was designing a deck for my house, and made a scale model of it, along with the deck. My daughter helped a bit; especially the painting. Well when I shared our creation, someone suggested it might be a good dice tower. That's when I started making that my mission, and got a bit carried away in the process.

Tree supports from the build plate recommended. Supports will be needed for the windows and small round tables, but not much else.

You will notice a lot of cutouts in the files. These are simply to reduce the time and material needed. I printed at 15% infill but feel free to use more or less as desired.