3D model description
Organizers for Lost ruins of Arnak base board game and Expedition Leaders expansion.
Containers for leaders' components fit the expansion box. Other items (from the base game and the expansion) are kept in dedicated organizers in the base game box. They fit the box very well and provide quick game set up.
Organizers are decorated with theme reliefs. Resources are kept in containers with lids to prevent components from falling out during the storage.
The whole set contains:
- 2 resources organizers,
- 4 player items' organizers,
- card tray,
- site & guardian organizer,
- assistant organizer,
- temple tile organizer,
- automa tile organizer,
- 6 leader's containers.
There are a lot of components in this set, but each .stl file has a proper name.
I have designed 6 containers for each leader's components. You could think that it's a bit too much as there are not so many of these items. However it's so nice just to reach for a proper container and get all these items at once.
Each resources organizer has a slip-on lid. They fit very well. An indentation in front wall of the container facilitates grabbing the lid. The player items' organizers and leaders' containers has hinged lids.
- RESOURCES ORGANIZER 1: This organizer consists of: Resources1 container and Resources1 lid. There are 5 sections for 5 different tokens: coin, compass, tablet, arrowhead and jewel. Each section has a rounded bottom to facilitate the draw. Theme reliefs decorate the lid.
- RESOURCES ORGANIZER 2: This organizer consists of: Resources2 container and Resources2 lid. The container has 4 sections. 2 bigger ones are for: idol and research bonus tiles. Smaller sections are for: blocking and reserve tiles.
Rounded bottom facilitates the draw. There are recesses for moon staffs in the lid. Reliefs around them decorate the lid.
- PLAYER ITEMS' ORGANIZER: 4 of such organizers must be 3d printed - for 4 players. This organizer consists of: a player container and a lid. 4 different guardians decorate lids: boar, scorpion, tiger and viper. The container is adapted to hinged lids. The bottom in this container is sloped, so it's easy to take base player's cards out. The slope has indentations, where wood tokens and figures are kept. Sections for these items are big enough to easily pick components up. Tent tiles from the expansion are kept here too.
- CARD TRAY: It is a tray with 3 sections for 3 decks: artifact, fear and item cards. A sloped bottom facilitate the draw. It accommodates cards from the base game and the extension. It is designed for cards without sleeves.
- SITE & GUARDIAN ORGANIZER: Site and guardian tiles are kept here in 3 sections. There are indentations to facilitate the draw. Thicker walls reinforce this container. Level I, level II and guardian tiles differ in their dimensions, so each section is a little different. Reliefs on the bottom indicate the deck arrangement.
- ASSISTANT ORGANIZER: This organizer has 3 sections for 3 decks of assistant tiles that are available during the play. It is designed to facilitate the tiles draw and to fit the game box [it's length is related to both resources organizers].
- TEMPLE TILE ORGANIZER: This organizer is related to the game set up of temple tiles, so it fits the game board. There are different indentations to facilitate the draw during the play.
- AUTOMA ORGANIZER: It is designed to facilitate both the storage and the solo play as well. Its height is related to 10 tiles deck. Indentations provide easy access to tiles.
- LEADERS' CONTAINERS: For each expedition leader there's a dedicated container with hinged lid. Openwork decreases filament usage. Hinged lids are easy to attach to the containers. Indentation in the front and bottom wall facilitates opening the box and taking components out.
There are 6 lids with different reliefs dedicated for each expedition leader. They are related to the drawings from the board game.
Components of each leader differ a bit one from another, so there 4 types of containers: 8mm container deep for Baroness, 9mm deep container for: Falconer, Explorer and Professor, deeper container for Captain (the archaeologist pawn is 10 mm thick) and longer container for Mystic. These different heights ensure that all containers fit the expansion board game box.
09a. I have added additional Leaders_ContainersWithSlidingLids_JKa.zip file with optional Leader's organizers. There are sliding lids instead of hinged ones. I think they work better and are more reliable.
Some photos in higher resolution:
Arnak organizers set
Arnak game set up - With these organizers set a supply board is no needed.
Arnak resources organizer 1
Arnak resources organizer 2
Arnak temple tile organizer on the game board
Packed 1
Packed 2
Expedition leaders 1
Expedition leaders 2
Expedition leaders 3
Also photos of Leaders' containers with sliding lids:
Leaders - containers with sliding lids, photo 1
Leaders - containers with sliding lids, photo 2
Leaders - containers with sliding lids, photo 3
Here's the link for my previous version - it's dedicated for Arnak base board game.
3D printing settings
All organizers were 3D printed on Prusa MK3:
- in PLA (F3D gold pearl),
- No support is needed,
- Infill 10% rectilinear.
I've made some small changes in settings for particular models:
- Card tray: 0.2mm layer height - it's faster, still good quality,
- Lids: Monotonic top fill + 0.15 first layer height + 1 vertical perimeter - to increase reliefs quality,
- Site & guardian organizer: 20% infill - to reinforce the stand.
Note1: I use slightly changed default Print settings "0.15mm SPEED MK3" in PrusaSlicer.
Note2: I use 0.4 mm nozzle and 0.15 mm layer height - these settings ensure that lids fit their containers very well. I recommend using brim also - it supports pin hinges of lids.
Printing Time (for one item of each kind):
01.Resources organizer 1:
7h58' - container
3h22' - lid
02. Resources organizer 2:
6h9' - container
1h58' - lid
03. Player items' organizer:
2h30' - container
~ 2h - lid
04. Card tray: 6h21'
05. Site & guardian organizer: 10h6'
06. Assistant organizer: 2h28'
07. Temple tile organizer: 2h3'
08. Automa organizer: 2h17'
09. Leaders' containers:
2h31' - 8 mm container
2h38' - 9 mm container
3h16' - Captain container
3h7' - Mystic container
~3h40' - lid
5h11' - Mystic lid
