Identifier

Mop or broom identifier.

The idea arises because my mistress when changing the mop refill, it turns out that it is the same color as the mop we use to clean the dogs' pee-pee.

So I came up with the idea of identifying the mops with something simple, quick to see and not costing a lot of time or money. And I came up with this idea. The parts take no more than 30 minutes to print, and consume only ~3g of PLA.

It is adapted to mops with tube diameter of 22mm or less. And the threaded part where the refill is inserted must have a diameter of at least 25mm for it to work. If it is smaller the model falls off.

**If you need a specific name, please contact us to include it.

Identifier of the mop or broom.

The idea arises because my wife when changing the mop refill, it turns out that it is the same color as the mop we use to clean the dogs' pee.

So it occurred to me to identify the mops with something simple, quick to see and that did not involve a high cost in time or money. And this idea came to me. Parts take no more than 30 minutes to print, consuming only ~3g of PLA.

It is adapted to mops with a tube diameter of 22mm or less. And the part of the thread where the refill is inserted must have a diameter of at least 25mm for it to work. If it is smaller the model falls.

**If you need a specific name, contact me to include it.

Coating thickness .- 0,2mm

Wall lines .- 4

Solid layers sup/inf .- 4

Filling .- 0%

Temperatures:

 Printing .- 200º C


 Bed .- 60º C

Print Speed .- 50mm/s

Shrinkage .- 3mm at 25mm/s

Parts manufactured in:

Machine: Ender 3 V2

Material: PLA

Manufacturer: Smart Materials

Type: Smartfill

Color: Ivory White

Layer thickness .- 0.2mm

Wall lines .- 4

Upper/lower solid layers .- 4

Infill .- 0%

temperatures:

  Printing .- 200º C


  Bed .- 60º C

Printing Speed .- 50mm/s

Retraction .- 3mm at 25mm/s

Parts manufactured in:

Machine: Ender 3 V2

Material: PLA

Manufacturer: Smart Materials

Type: Smartfill

Colour: Ivory White