Base Lithophany

In the need to be able to have a photo (lithophany) standing upright and with its own light, I came up with the idea of this lithophany base. It is a base for a specific lithophany, in one of the attached images you can find the necessary adjustments; as it is in the shape of an arch, 200 mm high and 143.2 mm wide, among other data. I can modify the width to the size you need, you only have to buy this design and send me a message to make the adjustment and send it back to you, so you don't battle with the dimensions. It is a very simple but very nice base, I will leave which is the wire and threading I used for the project.

https://www.amazon.com/Simple-Deluxe-Clamp-Light-2700K/dp/B08MZNNHS9?th=1

I disassembled the lamp and kept the cable to insert the bulb, just that.

I designed a quick and easy to print little test to see if the lithophane will fit in the final, you can print that one first to check measurements and then print the complete one. I can also modify that design (both would be modified to the size you tell me).

What you can also do is to adjust the height of the photo in Lithopnae Maker with a ruler of 3 so that it adjusts itself to the width and is the same as the image (143.2 mm) so you don't need to make any dimensional changes and can use the design as it is.

Layer - 0.2 mm
Speed - 50 mm/s
No supports
Infill - 15%
Temperature 205 degrees and 70 degrees bed