GAMER HEADSET HOOK HOLDER

GAMER HEADSET HOOK HOLDER FOR DESK STAND:

✅ Easy to install (use double-sided adhesive tape, not included).

✅ Store your headset elegantly on the wall or other smooth surface.

✅ Protect it from dirt, dust and clutter on a smooth base.

✅ Ideal material for printing: ABS or TPU (ABS is recommended as it is more resistant).

✅ In order for the backing to adhere well to the surface, it must be cleaned and dried where you want to stick it. After being glued, it should be left to stand for 3 minutes for a good adhesion of the product.

APPROX. DIMENSIONS:

Length: 10 cm

✅ Width: 4.6 cm

✅ Height: 6.3 cm

TERMS OF USE:

✅ Personal Use is OK.

Commercial Use is OK.

❌ Do not claim this work as your own.

FOR WEB:

✅ You must link back to 👉🏼 www.ready4render.com

FOR PRINT OR OTHER PROJECT:

✅ Personal Use is OK.

✅ For Commercial / Promotional use you must include:

The link to 👉🏼 www.ready4render.com on any product pages online.

✅ If you sell this product personally you must also put the credit of the creator.

Copyright remains with me.

I hope you enjoy my Work.

---

GAMER HEADSET HOOK MOUNT FOR DESK TOP TABLE:

✅ Easy to install (use double-sided adhesive tape, not included).

✅ Store your headphones elegantly, on the wall or other smooth surface.

✅ Protect it from dirt, dust and clutter on a smooth base.

✅ Ideal material for printing: ABS or TPU (ABS recommended as it is more resistant).

✅ In order for the backing to adhere well to the surface, it must be cleaned and dried where it is to be glued. After being glued, it should be left to stand for 3 minutes for a good bonding of the product.

APPROX. DIMENSIONS

✅ Length: 10 cm

✅ Width: 4.6 cm

✅ Height: 6.3 cm

CONDITIONS OF USE:

✅ For personal use is fine.

✅ For commercial use is fine.

❌ Do not claim this work as your own.

FOR WEB:

✅ You must link to 👉🏼 www.ready4render.com

FOR PRINTING OR OTHER PROJECTS:

✅ For personal use is fine.

✅ For commercial/promotional use, you must include:

The link to 👉🏼 www.ready4render.com on any online product page.

✅ If you sell this product personally you must also list appropriate credits to the creator.

The copyright remains with me.

I hope you enjoy my work.

Quality:

Layer Height: 0.15mm

Perimeter:

Wall thickness: 1mm

Top layers: 4 or 6

Bottom layers: 1 or 2

Filling:

Fill density: 10%.

Pattern: Grid

Material:

Printing temperature: 212ºC

Printing plate temperature: 50 or 60ºC

Enable retraction: Yes

Enable retraction in layer change: Yes

Speed:

Print speed: 100mm / s

Filling speed: 60mm / s

Wall speed: 50mm / s

Displacement:

Hairstyle mode: Everything.

Z jump in retraction: Yes

Enable Z jump in retraction: Yes

Refrigeration:

Activate cooling: No

Support: No