Modular toilet paper roll furniture

The idea is simple, there are 3 types of toilet paper connectors, and you print as many as you want from each part depending on the furniture you are aiming for

There is a part that on one side interfaces with rolls of toilet paper and on the other side is flat (this part is good for the legs of the furniture)

There is a part that interfaces on both sides with rolls of toilet paper

And there is a part that interfaces with rolls of toilet paper from three directions - and is necessary for creating shelves
In addition to the three parts that can be found in 2 different versions there are 2 more files

Shelf cover - the slot created between 2 rolls of toilet paper on the shelf slightly impairs the functionality of the shelf and here the cover goes into the picture and solves it (you can see this part in the pictures)

Another part there is is the test part, not all toilet paper rolls are equal in diameter
The goal is for the cylinder to fit into the connector with pressure so that no glue is needed, I recommend that you first print the test part and see if the diameter of your toilet paper fits the parts, if they do not, play with the scale in a minor way (millimeters here or there)

Once you have found the desired scale use the same scale for all the parts :)

If you are printing the project I would love to see pictures :)

There is no need for supports, the printer will be able to bridge, although the parts can come out cleaner with supports, but you do not see it anyway ..
I did not use the supports

The files are already in the most ideal orientation for printing

There is a chance that in the shelf connector you will need to sand a little

#UPCYCLINGFIVERR