Fundraiser: Ukrainian soldier with captured AK-12

As more and more invaders are killed and captured by Ukrainian soldiers defending their homeland, enemy weapons increasingly fall into Ukrainian hands. One of the most-prized is the modern AK-12 rifle. Developed from 2010 to 2017 and finally entering service in 2018, the AK-12 is a 5th generation Kalashnikov chambered to fire 5.45×39mm rounds and used primarily by "elite" enemy units.

This 3D-printable .STL file represents a modern Ukrainian special operations soldier (with distinctive trident patch and identifying yellow tape) firing a captured AK-12 rifle, and was designed by Ukrainian sculptor Nikita Klimenko (find him here https://www.artstation.com/gwin and here https://www.instagram.com/gwinpaket/) to raise funds for the defense of Ukraine. The decorative base is separate and shows wreckage from a destroyed "Z" Putinist vehicle and a Ukrainian flag flying above it.

All donations raised by this 3D print file will go directly to the National Bank of Ukraine's special fundraising account for Ukraine's armed forces (https://bank.gov.ua/en/news/all/natsionalniy-bank-vidkriv-spetsrahunok-dlya-zboru-koshtiv-na-potrebi-armiyi).

As you can see in the example pictures, the sculpt scales well with figures from 54mm scale all the way down to 20mm scale (and will likely go even smaller just fine).

Included in this download is one digital .STL file for 3D printing (plus a pre-supported file, but be careful when removing supports around the rifle, especially in smaller scales). THIS IS NOT A PHYSICAL PRODUCT.

The test prints visible in the pictures were done on an Elegoo Mars 2 resin printer using Elegoo ABS-like gray resin at a .025 layer height.