Skip to content

QC V2 Scorpion Evo clone airsoft body kit

πŸ”« 3D models of guns or weapons are dummy objects or prop toys and have no real functionality as weapons. They are intended for entertainment or decorative purposes only. For any design violating our T&Cs, please report them.

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 6.6k views
  • 21 likes
  • 6 downloads
License
3D design format
STL and ZIP Folder details Close
  • AWCY adapted Scorpion Stock adapter.stl
  • Bolt 9mm para.stl
  • Left Upper.stl
  • M-Lok Handguard.stl
  • M4 Buffer tube adapter (m4 nut and Bolt).stl
  • M4 Mag Lower.stl
  • MPX Pic rail adapter (no battery).stl
  • Outer barrel (229mm inner).stl
  • Quad Rail (Full length).stl
  • Quad Rail (Short length).stl
  • Quad Rail (Trimmed length).stl
  • Right Upper.stl
  • Scorpion Lower.stl
  • Screw cap.stl
  • Stock Bolt.stl
  • Stockless rear adapter (Hpa pistol config).stl
  • Threaded Pin.stl
  • V2 Scorpion Evo.zip
    • STL's/Bolt/Bolt 9mm para.stl
    • STL's/Bolt/Stock Bolt.stl
    • STL's/Dummy Pin/Screw cap.stl
    • STL's/Dummy Pin/Threaded Pin.stl
    • STL's/extra.txt
    • STL's/Handguard/M-Lok Handguard.stl
    • STL's/Handguard/Quad Rail (Full length).stl
    • STL's/Handguard/Quad Rail (Short length).stl
    • STL's/Handguard/Quad Rail (Trimmed length).stl
    • STL's/Lower Receivers/M4 Mag Lower.stl
    • STL's/Lower Receivers/Personal lowers/Evo Lower.stl
    • STL's/Lower Receivers/Personal lowers/M4 Mag Lower.stl
    • STL's/Lower Receivers/Scorpion Lower.stl
    • STL's/Outer Barrel/Different length barrels.txt
    • STL's/Outer Barrel/Outer barrel (229mm inner).stl
    • STL's/READ.txt
    • STL's/Scorpion Assembly Guide.pdf
    • STL's/Stock/AWCY adapted Scorpion Stock adapter.stl
    • STL's/Stock/AWCY STOCK WARNING!!!.txt
    • STL's/Stock/M4 Buffer tube adapter (m4 nut and Bolt).stl
    • STL's/Stock/M4 Buffer Tube adapter (m5 nut and Bolt).stl
    • STL's/Stock/MPX Pic rail adapter (no battery).stl
    • STL's/Stock/MPX Pic rail adapter (w battery wire cut).stl
    • STL's/Stock/READ ME!!!.txt
    • STL's/Stock/Stockless rear adapter (Hpa pistol config).stl
    • STL's/Upper Receiver/Left Upper.stl
    • STL's/Upper Receiver/Right Upper.stl
  • V4 Scorpion Evo.zip
    • EVO/Bolts/Bolt .556.step
    • EVO/Bolts/Bolt 6mm.step
    • EVO/Bolts/Bolt 9x19.step
    • EVO/Handguards/Carbine/Carbine Handguards.PNG
    • EVO/Handguards/Carbine/Carbine Mlok Rail.step
    • EVO/Handguards/Carbine/Carbine Quad Rail.step
    • EVO/Handguards/V1/Mlok/V1 Mlok.step
    • EVO/Handguards/V1/Quad/Mlok Quad Rail full length.step
    • EVO/Handguards/V1/Quad/Mlok Quad Rail medium.step
    • EVO/Handguards/V1/Quad/V1 Quad Rail short.step
    • EVO/Handguards/V1/V1 Handguards.PNG
    • EVO/Handguards/V2/Mlok/V2 Mlok.step
    • EVO/Handguards/V2/Quad/V2 Quad Rail.step
    • EVO/Handguards/V2/V2 Handguards.PNG
    • EVO/Lowers/Evo Lower/Mag Release.step
    • EVO/Lowers/Evo Lower/Standard Evo Lower.step
    • EVO/Lowers/M4 Lower.step
    • EVO/Stock Options/In Progress.txt
    • EVO/Stock Options/Rear M4 buffer tube.step
    • EVO/Upper/Upper L.PNG
    • EVO/Upper/Upper R.PNG
    • EVO/Upper/Upper Receiver L.step
    • EVO/Upper/Upper Receiver R.step
    • EVO/Xtra needed parts/Selector contact.step
    • EVO/Xtra needed parts/Selector Cover.step
    • extra.txt
    • Other needed files/Different length barrels.txt
    • Other needed files/Dummy Pin/Screw cap.stl
    • Other needed files/Dummy Pin/Threaded Pin.stl
    • Other needed files/Outer barrel (229mm inner).stl
    • READ.txt
    • Scorpion Assembly Guide.pdf

Learn more about the formats
Last update 2023-08-04 at 05:00
Publication date 2022-06-15 at 19:02
Design number 756089
MadMaker_Airsoft

MadMaker_Airsoft

3D printer file info

3D model description

This is a scorpion evo clone replica body kit for any similar styled V2 gearbox with interchangeable parts you can mix and match with the other parts included. This body kit is not easily broken under the right print settings and infill as the impact resistance of the kit goes to the metal gearbox that can take a beating. THIS IS NOT 1:1 as there has been problems I had to compromise on but found it rather more modular to fix in the sense of working with the most widely used gearbox

FOR THOSE WHO DONT WANT EVO MAGS
The body kit has an AR mag lower receiver that is more familiar to the most commonly used mid cap m4 mags that can hold up to triple the Evo mags can.
MP5 mag compatible lower is in the works as well as a carbine barrel shroud

M4 buffer tube adapter for additional rear battery space, also a closed rear plate adapter for a pistol or CQC like configuration. Also a printable Evo clone stock rear adapter although no rear battery space (WARNING!!! The stock is from AWCY on thingiverse from a ghost gun file in the MOD 9 zip folder) Research your country or states laws before downloading. I AM NOT LIABLE for ones negligence of someone's local laws

WARNING FOR AIRSOFT USE ONLY

Hardware needed for Evo body + Lower
6x M4x14 Bolt
7x M4 Nuts
1x M4x40 Bolt
1x Strike Industries medium length Charging handle
NEIKO Spring assortment kit (preference)
1x Airsoft unjamming rod
(optional) Standard M4 outer barrel
1standard Airsoft M4 select fire switch + screw
AR/M4 mil spec grip

For M4 Mag Lower (no unjamming rod)
standard Airsoft M4 select fire switch + screw
Standard M4 mag release

*****AND STRIKE INDUSTRIES CHARGING HANDLE****
FUTHER INSTRUCTIONS ARE IN THE FILES, if you have any questions feel free to ask

STEP files unavailable at the moment, when done I encourage making your own unique Evo (reselling prohibited)
Made something you think would work better with this kit? Contact me and we can discuss possible sales of your reworked parts

3D printing settings

PETG/PLA+ is recommended unless you can print ALBS
I recommend any infill rate above 60% regular infill. or 4 walls 25% gyroid is my personal favorite to protect the body as much as possible, although the design curves around the gearbox almost flush to transfer impact shock straight to the durable metal Gearbox

Categories

Designs β€Ί Gadget

Tags

Advertising

Issue with this design? Report a problem.

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.