Ring Cellphone

The published model is a ring to hold the cell phone.

The design is very aesthetically pleasing and 100% functional.

In addition to the 3D printed parts it is necessary a 1 mm diameter and 21 mm long nail to use it as a metal shaft (The nails come 25 mm long but by cutting it with a pliers we already get our shaft).

A M4 x 6 mm long round head allen screw is also required.

And finally a 28x38mm piece of double contact tape to adhere the ring to the cell phone.

The M4 screw should be attached to the base of the ring with a drop of glue in the assembly process.

The published model is a ring to hold the cell phone.

The design is very aesthetically pleasing and 100% functional.

In addition to the 3D printed parts, a nail with a diameter of 1 mm and a length of 21 mm is necessary to use it as a metal axis (The nails come with a length of 25 mm, but when we cut it with pliers we already obtain our axis).

A round head Allen screw M4 x 6 mm long is also required.

And finally a 28x38mm piece of double contact tape to adhere the ring to the cell phone.

The M4 screw must be fixed to the base of the ring with a drop of glue in the assembly process.

Without support

Backfill = 20%.

Layer thickness. 0.2 mm

Unsupported

Infill = 20%.

Layer thickness. 0.2mm