WWII PILOT

World War II pilot, this time we have traveled back in time to take on the greatest aviation aces of an era full of courage and stoicism, when technologies relied on the basic principles of mechanics to optimize their ships and the skill of their men to fly them.

Inspired by the pilots of the Grumman F4F wildcats, I have taken as a reference the basic clothing of these great men, to generate a standard basic model of an allied second war pilot.

With dimensions of 100mm height x 84mm base x 46mm width in its full scale version.

The file package includes 3 scales with their respective levers AND parachutes (see photos):

100 mm height (seated)

160mm height (scale factor 1.6)

45mm height (scale factor 0.45)

The design mode, makes the seat and the pilot separately, this on the grounds that some users only need the seat and not the pilot and others only the pilot; if the need is to cover a project, you can download both file packages.

Remark: the scale factor is important when you have downloaded the pilot and you want to increase the size of the seat based on the size you have selected, take that data and enter it in the scale box, depending on the software you are using.

Note: the pilot is shown seated in the cockpit section, which you can purchase in my gallery as well.

Be sure to visit my gallery "Efran", to see the other pilots I have, I'm sure they will be of great help to your projects, be it RC planes, games, comics..anyway, imagination sets the limit.

leave me your comments, I'm always ready to answer you.

enjoy the model!

UPDATE!!!: the pilot has been optimized, made of solid filler, for easy printing at low scales, also added 1/72 scale (72mm height), with parachute and joystick.

Recommendations for scales!!!: starting from the 1/1 scale model of 100mm height, you can enlarge and reduce the model to your requirement.

if it is smaller than 100mm type 0.72(example) and your reduction will be 72mm height; or the size you require.

if greater than 100 mm type 1.20(example) and your magnification will be 120mm; or the size you require.

any questions or doubts, contact me to make improvements or additional facilities!.

Thank you!!!

Printing parameters

Filament: PLA

Filling density: 30%

Layer height: 3

Frame thickness: 2 (improves detail)

Detail threshold: 0.02 (refines output printout)

Parts: 6 unit

Development: 3DMax.