Elden Ring Prisoner posable action figure

This is a figure based on the Prisoner starting class from Elden Ring, and features multiple points of articulation and three accessories. I wanted to practice designing a G. I. Joe RAH style figure, and figured I would base it on my chosen starting class for Elden Ring.
He comes with an Estoc, a Glintstone Staff and a Rift Shield, as well as additional lower legs and bare feet for if that's your kind of thing.
Apart from the elbow and knee hinges, all other connections use 3mm pegs/sockets, which is one of my standard sizes.

Contact me on twitter @DftDesigns3D

-The STL files provided are set up how I printed them, by body part/colour. If you require individual parts, the stl files can be imported into tinkercad (http://www.tinkercad.com ) and unwanted parts removed.

-The arm and leg files will need to be horizontally flipped for the right arm/leg

-Several holes in the design are designed for 1.75mm filament to fit through, and pin the model together, however due to 3D printing tolerances, these may print to large or too small, resulting in the filament needing to be shaved down in order to fit, or thickened up with glue or resin. This also applies to the 5mm posts/pegs that are used throughout the figure.

-My copy was printed using an Ender 3, using Basicfil PLA and Esunmatt PLA.