Tin Can Polishing Remix of Reittec Polisher

The original design used a ikea glass drum.
I once had my glass drum break horribly and spill powder EVERYWHERE :,(
I Remixed this thing to use a steel drum / Tin Can.
Now its much more durable! :D

I am from germany so the links lead to german suppliers, but i reckon Stuff's pretty similar in different places around the world. (If not feel free to comment.)
Also I changed the Wheel attachment to the axles to the Frame to be spanned from the outside.
That way you can change a Wheel without a full disassembly.

The upper support is a changed design to adapt it to the new container Tin Can and to make it fit to a Prusa Mini Plus build volume.

All parts prtinted on a Prusa mini+ in PETG.
I printed nearly all parts with 25% infill.

Parts list still incomplete: I will update as I finished listing them. :)

[Tools needed for assembly]

A Saw / or something to cut acrylic with
A soldering Iron with some solder
Cable snippers
Cable Ties
Screwdriver (With bit according to chosen Screws)
Some Glue to glue the acrylic to the lid (I used "Pattex Kraftkleber Transparent")
Some Glue to Glue on the thingis in the barrel (Also used "Pattex Kraftkleber Transparent") I also tried using epoxy, that also worked like a charm. (My parts are printed in PETG, choose a glue that works with your filament material.)
[Bill of Meterials]
Mechanical Parts you need to build it:

1 piece - Tin Can 3l approx. 160,3mm the ring up and bottom is approx 162,5 and the thing is approx 183mm high https://www.amazon.de/gp/product/B08S45Q76M/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1
4 pieces - 608zz "Skateboard" Bearings (or use 608RS and lubricate yourself)
2 pieces - O-Ring 42x35x3,5 (For the fron wheels to make it run smoothly.) (This could also be adapted to the upper downward holder... Maybe i will implement that soon :)
Some acrylic to make see through "glass" for lid. (And something to cut it with :P)
An Ikea drawer organizer thingi to keep spills from going everywhere. (especially helpful if you choose to use Powdered Compounds.)
Alot of M3 Screws (I would buy a set with nuts)

8 pieces - M3 x 12 (to screw in the "inner casing") (with NUTS)
2 pieces - M3 x 25 (for knob) (with NUTS)
2 pieces - M3 x 25 (support_wheel_front.stl) (with NUTS)
2 pieces - M3 x 30 (support_gear_for_bearing.STL) (with NUTS)
4 pieces - M3 x 25 (gegendruecker3_longer_V2.stl) (with NUTS)
2 pieces - M4 x 15 (At the Front to change Degrees) (with NUTS and DISCS approx. 12mm Diameter)
5 pieces - M3 x 20 (gegendruecker1 (2)_smaller.stl and gegendruecker2 (2)_smaller.stl) (with NUTS)
1 piece - Set Screw M3 x 20 (to fix "drive_gear.STL" to axle of motor.)
6 pieces - Slit screw M3 x 5 (depends on motor)
[Electrical Parts]

1x - Powersupply rated 12V 1A
1x - Fuse under 1A (Basically under the rated Power supply amps) and chosen based on used Motor.
1x - Fuseholder https://www.amazon.de/gp/product/B07H95D6YG/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
1x - PWM Speed controller for the motor: https://www.amazon.de/gp/product/B07MNX1HFT/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
1x - Male Barrrelplug 5,5/2,5 mm with "screw terminals "https://www.amazon.de/adaptare-93525-DC-Hohl-Stecker-zweipoliger-Terminal-Block/dp/B01H5C29C2/ref=sr_1_13?keywords=barrel+plug+5%2C5+2%2C5&qid=1655448779&sr=8-13
1x - Female Barrelplug 5,5/2,5 mm with "screw terminals" https://www.amazon.de/adaptare-93525-DC-Hohl-Stecker-zweipoliger-Terminal-Block/dp/B01H5C29C2/ref=sr_1_13?keywords=barrel+plug+5%2C5+2%2C5&qid=1655448779&sr=8-13
1x Motor 12V - 200RPM (JGB37-520-CE) - "Full speed go BRRRRRR!" I would lubricate the gearbox myself with some "Lithium Grease"- https://www.amazon.de/gp/product/B0824V7YGT/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Switch Diameter 20,2mm and Rated 250V 10A. (Built in depth 23mm) https://www.pollin.de/p/wippenschalter-1xe-a-250v-10a-sw-oe-20-2mm-421023
Materials I sucessfully used for Tumbling:

Siliciumcarbid
Wallnut chels
But you can use other stuff too, as the drum is not easily damaged. (compared to a glass drum)
If you have any questions feel free to ask.
This Remix borrows also alot of other peoples ideas and remixes from other people which i will list below:
(if you feel left out drop me a message and I will include you.)
Also feel free to post improvements, thingiverse is a glorious place. :)

Other people that this is based on:

reitter_m - https://www.thingiverse.com/thing:4076827 - Polisher and the 170mm ikea variant (He made it happen. / Tip this guy)
Zefram_Cochrane - https://www.thingiverse.com/thing:4852638 - He made the push down hold it in place bracket. so the can cant go away. (I had to adjust the height a bit and i optimized the size of the Upper thingi)
Fasel - https://www.thingiverse.com/thing:4750146 - Alot of awesome additions. The lid, a stronger base, holes to route cables and alot of other stuff. I redesigned the axles to be mounted from the outside. to make changing the wheels easier.
TODO:

Finish BOM
Finish Assembly Chart / Explosion matrix
Find Screws for Lid and to Fix at the rear
Changelog:

20.06.2022 - Fixed an issue regarding the "Drumgear". I uploaded the wrong version. Now its the correct version. fitting to the drivegear adapter. Corrected some typos. Included the creator of the Reitec polisher.
24.06.2022 - Updated the Drumgear to be the correct one. Sorry for the confusion.
24.06.2022 - Added alot of exemplarotry images / and Photos and added alot of BOM.
27.06.2022 - added alot of forgotten models. Sorry

-