Traffic Weapon Kit for Transformers Figures

I designed a modular traffic-inspired weapon kit for Transformers figures to wield. Here's all the information for the individual weapons.

Traffic Light, featuring a 5mm handle on the bottom with a small 3mm hole under it, a 3mm peg on the top, and blast effect pegs on each of the lights. I made them slightly smaller than 3mm so you can paint the lights without making the pegs too tight. Minor sanding may still be required depending on how many layers you use, though.

Stop Sign Axe, featuring a 3mm peg on the bottom along with a 5mm area on the handle that allows regular figures to hold it properly.

Traffic Cone, featuring a slot on the bottom that allows it to connect to the Gun Handle piece. There is a blast effect peg on the top of it to make the gun more convincing. It can also be used on its own as decoration, if that's what you prefer.

Gun Handle, which can connect to the Traffic Cone, Stop Sign Axe, or Traffic Light.

NOTE: the second picture shows what the pieces will look like after printing if you use each main filament color for them. Extra paint to bring out the details is necessary to make the pieces look like they do in the other pictures.

Layer Height:
0.1mm or 0.2mm
Supports: Yes
Orientation: Recommended to be printed as it's set. Still up to your own preference, though.

This set can work with resin or FDM printing.