T-26 Tank 1:35

The T-26 tank was a Soviet light tank used during many conflicts of the Interwar period and in World War II. It was one of the most successful tank designs of the 1930s until its light armour became vulnerable to newer anti-tank guns.

This model was created from scatch using Blender3D and its meant to be resin printed.

The model is scaled and designed to be printed in 1:35 scale, but can be scaled up. i will be updating the model to support smaller scales (less detail and thicker pieces)

The model measurements after printed are:

1:35 or 100%: 69mm x 134 mm x 68 mm

1:48 or 73%: 50 mm x 97 mm x 50 mm

1:72 or 48.6%: 33 mm x 65 mm x 33 mm

The model is divided into 10 parts: Hull, Turret, Left and Right Track, Front Light, Extra Wheel, Fan Cover, Left and Right Rear Hooks and Exhaust.

If you find any issues with the model or you would like me to add/change anyting please let me know.

For FDM Printing:

5-10% infill

1.2mm layer height

50mm/s speed

Support active: 5% density 60% support interface desity

Build Plate Adhesion: Brim

For Sla Printing:

This mode has a lot of thin details, make sure you add a fair ammount of supports and angle the tracks so that theyre standing, then rotate to have the least amount of overhangs for better surface finish

https://youtu.be/2vaMWneQRRU