Skip to content

Macchi MC.202 Folgore/MC.205 Veltro 1:12

IMG_20220523_231434075.jpg Macchi MC.202 Folgore/MC.205 Veltro 1:12
? Tqyy yy Macchi MC.202 Folgore/MC.205 Veltro 1:12
IMG_20220523_231523376.jpg Macchi MC.202 Folgore/MC.205 Veltro 1:12
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 3.4k views
  • 6 likes
  • 5 downloads
  • 4 collections
License
3D design format
ZIP Folder details Close
  • Macchi 202-205_881mm-v1.7.zip
    • Assembly-881/SpinnerMC205.PNG
    • Cura-881/Cura settings.pdf
    • Cura-881/CuraNotes-L3D.txt
    • Cura-881/Package - Ultimaker Cura Marketplace.url
    • Cura-881/PI3MK3M_AiFilter-881.3mf
    • Cura-881/PI3MK3M_Aileron1-L-881.3mf
    • Cura-881/PI3MK3M_Aileron2-L-881.3mf
    • Cura-881/PI3MK3M_BatteryTray-881.3mf
    • Cura-881/PI3MK3M_CHatch-Recessed-881.3mf
    • Cura-881/PI3MK3M_CoolerEngine-881.3mf
    • Cura-881/PI3MK3M_CoolerOil-881.3mf
    • Cura-881/PI3MK3M_ElevatorR1-881.3mf
    • Cura-881/PI3MK3M_ElevatorR2-881.3mf
    • Cura-881/PI3MK3M_ExhaustX2-881.3mf
    • Cura-881/PI3MK3M_FF0-881.3mf
    • Cura-881/PI3MK3M_FF1-Folgore-881.3mf
    • Cura-881/PI3MK3M_FF1-Veltro-881.3mf
    • Cura-881/PI3MK3M_FF2-881.3mf
    • Cura-881/PI3MK3M_FF3-881.3mf
    • Cura-881/PI3MK3M_FF4-881.3mf
    • Cura-881/PI3MK3M_FF5-881.3mf
    • Cura-881/PI3MK3M_FF6-Tail-881.3mf
    • Cura-881/PI3MK3M_Fin-881.3mf
    • Cura-881/PI3MK3M_HatchA-881.3mf
    • Cura-881/PI3MK3M_HatchB-881.3mf
    • Cura-881/PI3MK3M_Rudder1-881.3mf
    • Cura-881/PI3MK3M_Rudder2-881.3mf
    • Cura-881/PI3MK3M_Rudder3-881.3mf
    • Cura-881/PI3MK3M_ServoTray-881.3mf
    • Cura-881/PI3MK3M_SpinnerBaseMC205-881.3mf
    • Cura-881/PI3MK3M_SpinnerConeMC205-881.3mf
    • Cura-881/PI3MK3M_SpinnerPlugMC205-881.3mf
    • Cura-881/PI3MK3M_StabR-881.3mf
    • Cura-881/PI3MK3M_W0-L-881.3mf
    • Cura-881/PI3MK3M_W1-L-881.3mf
    • Cura-881/PI3MK3M_W2-L-881.3mf
    • Cura-881/PI3MK3M_Windshield-881.3mf
    • Cura-881/Sample.PNG
    • Design/Design01.PNG
    • Design/Design02.PNG
    • Design/Design03.PNG
    • Design/Design04.PNG
    • Design/Design05.PNG
    • Design/Design06.PNG
    • Design/Design07.PNG
    • Design/Design08.PNG
    • Design/Design09.PNG
    • Design/Design10.PNG
    • Design/Design11.PNG
    • Design/Design12.PNG
    • Design/Macchi C.202 Folgore - Wikipedia.pdf
    • Design/SpinF202.PNG
    • STL-881/Aileron1-L.stl
    • STL-881/Aileron2-L.stl
    • STL-881/AirFilter.stl
    • STL-881/BatteryTray.stl
    • STL-881/CHatch-Recessed.stl
    • STL-881/CoolerEngine.stl
    • STL-881/CoolerOil-L.stl
    • STL-881/CoolerOil-R.stl
    • STL-881/ElevatorR1.stl
    • STL-881/ElevatorR2.stl
    • STL-881/Exhaust-L.stl
    • STL-881/Exhaust-R.stl
    • STL-881/FF0.stl
    • STL-881/FF1-Folgore.stl
    • STL-881/FF1-Veltro.stl
    • STL-881/FF2.stl
    • STL-881/FF3.stl
    • STL-881/FF4.stl
    • STL-881/FF5.stl
    • STL-881/FF6-Tail.stl
    • STL-881/Fin.stl
    • STL-881/HatchA.stl
    • STL-881/HatchB.stl
    • STL-881/Rudder1.stl
    • STL-881/Rudder2.stl
    • STL-881/Rudder3.stl
    • STL-881/ServoTray.stl
    • STL-881/SpinnerBaseMC205-881.stl
    • STL-881/SpinnerConeMC205-881.stl
    • STL-881/SpinnerPlugMC205-881.stl
    • STL-881/StabR.stl
    • STL-881/W0-L.stl
    • STL-881/W1-L.stl
    • STL-881/W2-L.stl
    • STL-881/WindShield.stl
    • Macchi MC.202 Folgore-MC.205 Veltro 1-12 (L3D) - RC Groups.url
    • Instructions-v1.5-881mm.docx
    • Cura-881/PI3MK3M_MotorMount-BR4108-881.3mf
    • STL-881/MotorMount-BR4108.stl
    • Markings881/Folgore01-881.docx
    • Markings881/VeltroEgypt-881.docx
    • Factory881/CoolerEngine.factory
    • Factory881/CoolerOil.factory
    • Factory881/Elevators.factory
    • Factory881/FF0.factory
    • Factory881/FF1-Folgore.factory
    • Factory881/FF1-Veltro.factory
    • Factory881/FF2.factory
    • Factory881/FF3.factory
    • Factory881/FF4.factory
    • Factory881/FF5.factory
    • Factory881/FF6.factory
    • Factory881/Fin.factory
    • Factory881/Hatch.factory
    • Factory881/PLA-Ailerons.factory
    • Factory881/PLA-Clear.factory
    • Factory881/PLA-Parts.factory
    • Factory881/Rudder.factory
    • Factory881/Stabs.factory
    • Factory881/W0.factory
    • Factory881/W1.factory
    • Factory881/W2.factory
    • Cura-881/MachineSelection.PNG
    • Design/MC.205V 881mm v6.f3z
    • Markings881/Sunnyscopa Waterslide Decal Paper for Laser Printer - Clear, US Letter Size 8.5-X11-, 20 Sheets, Personalized Water Slide Tra.url
    • Assembly-881/InPlaceSupportGussets.PNG
    • PrusaSlicerNotes.txt

Learn more about the formats
Last update 2023-04-17 at 17:56
Publication date 2022-06-23 at 13:32
Design number 763412
GonzoTheGreat

GonzoTheGreat

3D printer file info

3D model description

The Folgore (Italian "Thunderbolt") was an Italian fighter aircraft developed and manufactured by Macchi Aeronautica, in Italy. It was operated mainly by the Regia Aeronautica (RA; Royal (Italian) Air Force) in and around the World War II. Designed by a team lead by Mario Castoldi, it is generally considered the best Italian fighter to operate in large numbers during the conflict. In combat, it very quickly proved itself to be an effective dogfighter against its contemporaries. During its service life, the C.202 was deployed on all fronts in which Italy was involved, from North Africa to the Russian campaign.
The C.202 (or M.C.202) followed the C.200 Saetta moving from a radial engine to an Italian-built version of the German Daimler-Benz DB 601A along with several streamlining improvements on the airframe. The key negative points on the Folgore were the lack of armament and complex construction requiring much more time to produce than say, the BF-109.
The C.205 was the next step, moving to the more powerful DB 605 engine and better armament, this translated into a higher wing loading and slightly different fuselage front. The C.205 was apparently at par with the famed Mustang and Spitfire. Sufficiently so that the Luftwaffe used a number of these aircraft to equip one Gruppe for a few months until they were re-equipped with the latest BF-109. Reliability and simplicity went in favor of the German aircraft.
This 881mm wingspan prototype should be powered by anything from a 2212 to a 4108 outrunner and is designed to be printed in LW-PLA, with key parts in PLA+, like the front fuselage sections, wing roots, motor mount, spinner, exhaust stacks, air filter and engine cooler. The design has carefully planned internal structures for LW-PLA slicing resulting in clean parts with minimum oozing and unwanted curlies trapped inside.

Included with this file:
β€’ STL files for all components
β€’ 3MF files for Cura v4 users
β€’ Factory files for Simplify3D (TBD)
β€’ Assembly manual and user guide
β€’ Sample markings
Showing 800mm version in pictures.

Check this RCGroup thread for the latest updates and questions: https://www.rcgroups.com/forums/showthread.php?4153695-Macchi-MC-202-Folgore-MC-205-Veltro-1-12-%28L3D%29

Updates:
2023-04-17: Updated Cura v4 files
2022-11-16: Added missing Factory files
2022-10-18: Updated 3MF Cura files for the wings. Wings are not using supports.

FLIGHT VIDEO: 600mm test flight: https://youtu.be/5a5afEyBsjc
800mm 4th test flight: https://youtu.be/EEVMjw4V8Lw

3D printing settings

PLA+ parts
β€’ print head = 220C
β€’ print bed = 60C

LW-PLA parts
β€’ print head = 250C
β€’ print bed = 60C
β€’ No retraction

LW-PLA parts
β€’ Print head = 250c
β€’ Print bed = 60c
β€’ Retraction distance to 0, you may need Extra Restart and Coasting.
β€’ Fan set to 0

PLA/PLA+ parts
β€’ Print head = 220c
β€’ Print bed = 60c

Only one side is provided when the Left and Right components are symmetrical. Use the Mirror function in your slicer to print the other one.

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.