Memphis Grizzlies NBA Logo

Hello friend, today I brought on my profile, another logo of the NBA series, the Memphis Grizzlies.

As you can see from the photos, the project is completely modular, I divided each piece, so you can print it in the color indicated by the team.

The dimensions are really good, the frame of the grizzlies measures 128 x 124 x 30, instead the base, measures 150 x 55 x 30, the supports must be used only for the grizzlies frame, are very few, and if you take a look at my settings, you will get a perfect print.

I want to remind you, that on my profile I will carry all the NBA logos, stay updated, and don’t forget to follow me.

I also want to remind you that almost all my projects are interlocking, and have a tolerance ranging from 0.35 to 0.50mm, depending on the project I go to work, I apply the right tolerance "tolerance standard of all printers"If you, like many others, don’t know what tolerance your printer has, I suggest you download my tolerance test, you can find it on my profile.

As always I want to thank you for spending your time viewing my project, and if you find it interesting, I suggest you take a look at my cults profile, because you will find a lot of interesting projects, and I’m sure you’ll find something that will do for you, I also remind you to leave me a like if you appreciate my work and follow me.

Good press friend for anything, contact me via messages.

Layer 0.15
Temp 205° / 50° PLA --- 230° / 65° PETG
Infill 10%
Top and Bottom Layer 4
Perimeter Layer 3
Support "View Photo"
Speed 50/60 mm/s