Skip to content

Stick Holder for 3-Wheel Rollator (and others)

photo4.jpg Stick Holder for 3-Wheel Rollator (and others)
photo3.jpg Stick Holder for 3-Wheel Rollator (and others)
photo2.jpg Stick Holder for 3-Wheel Rollator (and others)
photo1.jpg Stick Holder for 3-Wheel Rollator (and others)
photo5.jpg Stick Holder for 3-Wheel Rollator (and others)
cup_clamp_p1.png Stick Holder for 3-Wheel Rollator (and others)
cup.png Stick Holder for 3-Wheel Rollator (and others)
stick_clamp_p2.png Stick Holder for 3-Wheel Rollator (and others)
stick_clamp_p1.png Stick Holder for 3-Wheel Rollator (and others)
cup_clamp_p2.png Stick Holder for 3-Wheel Rollator (and others)
rollator_stick_clamp_p1_m4_nut.png Stick Holder for 3-Wheel Rollator (and others)
cup_clamp_p1_m4_nut.png Stick Holder for 3-Wheel Rollator (and others)
cup.stl Stick Holder for 3-Wheel Rollator (and others)
cup_clamp_p1.stl Stick Holder for 3-Wheel Rollator (and others)
cup_clamp_p2.stl Stick Holder for 3-Wheel Rollator (and others)
stick_clamp_p1.stl Stick Holder for 3-Wheel Rollator (and others)
stick_clamp_p2.stl Stick Holder for 3-Wheel Rollator (and others)
rollator_stick_clamp_p1_m4_nut.stl Stick Holder for 3-Wheel Rollator (and others)
cup_clamp_p1_m4_nut.stl Stick Holder for 3-Wheel Rollator (and others)
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 1.9k views
  • 2 likes
  • 40 downloads
License
3D design format
SKP and STL Folder details Close
  • cup.stl
  • cup_clamp_p1.stl
  • cup_clamp_p1_m4_nut.stl
  • cup_clamp_p2.stl
  • rollator_stick_clamp_01.skp
  • rollator_stick_clamp_p1_m4_nut.stl
  • stick_clamp_p1.stl
  • stick_clamp_p2.stl

Learn more about the formats
Publication date 2022-07-04 at 23:02
?
Published to Thingiverse on: 2022-07-04 at 18:55
Design number 773503
peaberry

peaberry

3D printer file info

3D model description

This is a walking stick holder for a Rollator/Walker. It was designed for a 3-wheel Rollator branded "Days", but it may fit others. This was designed to suit the following measurements:
* Rollator tube diameter 24mm (bottom part) and 19.1mm (top part)
* Stick diameter 23mm

The commercially available versions will only work with vertical tubes. However, with this version you can adjust the orientation of the lower "cup" part in increments of 90, 45 or 22.5 degrees, so it will suit models with horizontal, vertical or even sloping tubes.

Hardware required (for the version as pictured):
* 4x M4 x 10mm Socket Head Cap Screws
* 4x M4 x 8 x 6 Heat Set Inserts (embedded nuts)
* 1x M6 x 12mm Socket Head Cap Screw
* 1x M6 Nut

If you don't want to use the Heat Set Inserts, I've made a version for regular M4 nuts too. In that case you would need the files with "m4_nut" at the end of the filenames.

There are some other designs on Thingiverse, which may be useful if you need to mix-and-match parts to suit your model:
* https://www.thingiverse.com/thing:1604837
* https://www.thingiverse.com/thing:3238527
* https://www.thingiverse.com/thing:2477851

3D printing settings

-

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.