40K Cosplay Laspistol

An Accatran pattern inspired laspistol for 40K cosplay compatible with the power cell previously uploaded (also included here).

This reuses the grip and trigger from the excellent 40K Rogue Trader Plasma Pistol by Diehard2501:
https://www.thingiverse.com/thing:3863387

The Imperial Guard icon on the power cell is by SevenUnited:
https://www.thingiverse.com/thing:2996943

The other parts were designed from scratch in Tinkercad.

--- Edit 10 July 2022 ---
Added a second ammo cell option (Ammo2) that fits more snugly. Also added a plain version of the same (without the Guard logo) in case that's of use.

Designed for FDM printing, test model was printed in PLA at 0.12, 15% infill on a Creality CR6-SE. Brims may be needed depending on how good your adhesion is - adding one when printing the body upright on its butt is probably a good plan. No supports should be required except for under the trigger area when printing the grip; tree supports in just this area work well.

Parts labelled with "x2" etc need to be printed that many times. The kit uses 4 short (15mm) and 2 long (30mm) pegs; these are the same as 6mm dowels which may be used instead. (I print the short ones but use dowel for the long.)

There are holes for magnets in the top of the power cell, and inb the "roof" of of the magazine well. The ones in the pistol are larger for stronger magnets (7x2mm), the ones in the cell are smaller (6x0.9mm)