Skip to content

The Wright Military Flyer 1907

IMG_20220715_163604_4.jpg The Wright Military Flyer 1907
IMG_20220715_163527_1.jpg The Wright Military Flyer 1907
IMG_20220715_163643_0.jpg The Wright Military Flyer 1907
IMG_20220715_163542_0-COLLAGE.jpg The Wright Military Flyer 1907
IMG_20220715_163721_2.jpg The Wright Military Flyer 1907
unlikely-inventors-09.width-990_npQrzAl.jpg The Wright Military Flyer 1907
BR2211.png The Wright Military Flyer 1907
seat marks The Wright Military Flyer 1907
TTURLLLRLLLLL The Wright Military Flyer 1907
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 5.1k views
  • 14 likes
  • 12 downloads
License
3D design format
ZIP Folder details Close
  • update v1.zip
    • LANDING_GEAR_WHEEL.stl
    • RCBOX_REPLACE_SEAT.stl
  • wright_flyer_1907._stl.zip
    • CHAINDRIVE_ok/Flywhell.STL
    • CHAINDRIVE_ok/GEAR_LEFT.STL
    • CHAINDRIVE_ok/GEAR_RIGHT.STL
    • Elevator_ok/ELEVATOR_BOTTOM_DUO.stl
    • Elevator_ok/ELEVATOR_TOP_duo.stl
    • Elevator_ok/ELEV_STRuts_3X.stl
    • Elevator_ok/LOCKWASHER.stl
    • Elevator_ok/readme_elevator.txt
    • Elevator_ok/side_PANEL.3mf
    • Elevator_ok/side_PANEL.stl
    • Elevator_ok/Thumbs.db
    • Frame_Static_RC_stl/FRAME_1.STL
    • Frame_Static_RC_stl/FRAME_2_LEFT.STL
    • Frame_Static_RC_stl/FRAME_2_RIGHT.STL
    • Frame_Static_RC_stl/FRAME_3A_LEFT.STL
    • Frame_Static_RC_stl/FRAME_3A_RIGHT.STL
    • Frame_Static_RC_stl/FRAME_3_LEFT.STL
    • Frame_Static_RC_stl/FRAME_3_RIGHT.STL
    • Frame_Static_RC_stl/FRAME_4.STL
    • Frame_Static_RC_stl/FRAME_5_RC.STL
    • Frame_Static_RC_stl/FRAME_5_STATIC.STL
    • Frame_Static_RC_stl/FRAME_5__2SLIPO.3mf
    • Frame_Static_RC_stl/FRAME_5__2SLIPO.STL
    • Motor_Dummy/FOOTREST.3mf
    • Motor_Dummy/LEVER.3mf
    • Motor_Dummy/LEVER.stl
    • Motor_Dummy/MOTOR_RC.STL
    • Motor_Dummy/MOTOR_Static.STL
    • Motor_Dummy/PROP.3mf
    • Motor_Dummy/seat.3mf
    • Motor_Dummy/TANK.3mf
    • Motor_Dummy/TANK_AENOMETER.stl
    • Prop_static/PROP.stl
    • Prop_static/PROPBOLT.stl
    • Prop_static/PROPDISTANCE(6).stl
    • Rudder/SERVOHOLDER_RUDDER.STL
    • Rudder/SR_Rudder_stl/readme_rudder.txt
    • Rudder/SR_Rudder_stl/RUDDER_DISTANCE.STL
    • Rudder/SR_Rudder_stl/RUDDER_duo.stl
    • Rudder/struts_wing2rudder.stl/both strut_wing2rudder.stl
    • Rudder/struts_wing2rudder.stl/HOOK_WING.STL
    • Rudder/struts_wing2rudder.stl/STRUT_LOWER.STL
    • Rudder/struts_wing2rudder.stl/STRUT_UPPER.STL
    • STRUTs_wing/Alignment_device_struts.STL
    • STRUTs_wing/readme_strut.txt
    • STRUTs_wing/STRUT_FRONT_3_6x.3mf
    • STRUTs_wing/STRUT_FRONT_3_6x.stl
    • STRUTs_wing/STRUT_REAR_4_8x.3mf
    • STRUTs_wing/STRUT_REAR_4_8x.stl
    • STRUTs_wing/S_F1_1x.stl
    • STRUTs_wing/S_F2_LEFT_1x.stl
    • STRUTs_wing/S_F2_RIGHT_1x.stl
    • STRUTs_wing/S_R1_1x.stl
    • STRUTs_wing/Thumbs.db
    • Strut_Engine_ok/PLATE_16X19.STL
    • Strut_Engine_ok/STRUT_ENGINE_1.STL
    • Strut_Engine_ok/STRUT_ENGINE_2.STL
    • Wing_stl/chips.stl
    • Wing_stl/readme_wing.txt
    • Wing_stl/Upper_Wing/EYELET.stl
    • Wing_stl/Upper_Wing/W1_UPPER_LEFT.stl
    • Wing_stl/Upper_Wing/W1_UPPER_RIGHT.stl
    • Wing_stl/Upper_Wing/W2_UPPER_LEFT.stl
    • Wing_stl/Upper_Wing/W2_UPPER_RIGHT.stl
    • Wing_stl/Upper_Wing/W3_UPPER_LEFT_TIP.STL
    • Wing_stl/Upper_Wing/W3_UPPER_RIGHT_TIP.STL
    • Wing_stl/W1_BOTTOM_LEFT_UPGRADE.stl
    • Wing_stl/W1_BOTTOM_RIGHT_UPGRADE.stl
    • Wing_stl/W2_BOTTOM_LEFT.stl
    • Wing_stl/W2_BOTTOM_RIGHT.stl
    • Wing_stl/W3_BOTTOM_LEFT_TIP.stl
    • Wing_stl/W3_BOTTOM_RIGHT_TIP.stl
  • wright_flyer_1907_deutsch._stl.zip
    • Flgel/chips.stl
    • Flgel/oberer_Flgel/Lager_Verspannung.stl
    • Flgel/oberer_Flgel/W1_oben_links.stl
    • Flgel/oberer_Flgel/W1_oben_Rechts.stl
    • Flgel/oberer_Flgel/W2_oben_Links.stl
    • Flgel/oberer_Flgel/W2_oben_Rechts.stl
    • Flgel/oberer_Flgel/W3_oben_Links_TIP.STL
    • Flgel/oberer_Flgel/W3_oben_Rechts_TIP.STL
    • Flgel/readme_Flgel_deutsch.txt
    • Flgel/W1_Unten_Links.stl
    • Flgel/W1_unten_Rechts.stl
    • Flgel/W2_unten_Links.stl
    • Flgel/W2_unten_Rechts.stl
    • Flgel/W3_unten _Links_TIP.stl
    • Flgel/W3_unten_Rechts_TIP.stl
    • Hoehenruder/3mm_Rohr_Stop.stl
    • Hoehenruder/HR_oben_2Stk.stl
    • Hoehenruder/HR_Seitenscheiben.3mf
    • Hoehenruder/HR_Seitenscheiben.stl
    • Hoehenruder/HR_Streben_3X.stl
    • Hoehenruder/HR_unten_2x.stl
    • Hoehenruder/readme_elevator.txt
    • Hoehenruder/readme_HR_deutsch.txt
    • Hoehenruder/Thumbs.db
    • Kettentrieb/Kette_Links.STL
    • Kettentrieb/Kette_rechts.STL
    • Kettentrieb/Schwungrad.STL
    • Motorsttzen/Motorplatte_16X19.STL
    • Motorsttzen/Motorstrebe_1.STL
    • Motorsttzen/Motorstrebe_2.STL
    • Motor_Dummy/Fusssttze.3mf
    • Motor_Dummy/Fusssttze.stl
    • Motor_Dummy/Hebel.3mf
    • Motor_Dummy/Hebel.stl
    • Motor_Dummy/MOTOR_RC.STL
    • Motor_Dummy/MOTOR_Static.STL
    • Motor_Dummy/PROP.3mf
    • Motor_Dummy/RCBOX_ersetzt_Sitz.stl
    • Motor_Dummy/seat.3mf
    • Motor_Dummy/Sitz.stl
    • Motor_Dummy/TANK.3mf
    • Motor_Dummy/TANK_AENOMETER.stl
    • Prpeller_Standmodell/PROP.stl
    • Prpeller_Standmodell/PROPBolzen.stl
    • Prpeller_Standmodell/PROPDistanzstk.stl
    • Rahmen kpl (Frame)/FRAME_1.STL
    • Rahmen kpl (Frame)/FRAME_2_LEFT.STL
    • Rahmen kpl (Frame)/FRAME_2_RIGHT.STL
    • Rahmen kpl (Frame)/FRAME_3A_LEFT.STL
    • Rahmen kpl (Frame)/FRAME_3A_RIGHT.STL
    • Rahmen kpl (Frame)/FRAME_3_LEFT.STL
    • Rahmen kpl (Frame)/FRAME_3_RIGHT.STL
    • Rahmen kpl (Frame)/FRAME_4.STL
    • Rahmen kpl (Frame)/FRAME_5_RC.STL
    • Rahmen kpl (Frame)/FRAME_5_STATIC.STL
    • Rahmen kpl (Frame)/FRAME_5__2SLIPO.3mf
    • Rahmen kpl (Frame)/FRAME_5__2SLIPO.STL
    • Rahmen kpl (Frame)/Rad_Fahrwerk.stl
    • Seitenruder/SR_Ruder_stl/readme_SR_deutsch.txt
    • Seitenruder/SR_Ruder_stl/RUDDER_DISTANCE.STL
    • Seitenruder/SR_Ruder_stl/RUDDER_duo.stl
    • Seitenruder/SR_Servohalter.STL
    • Seitenruder/Streben_Flgel_zum SR/Beide Streben.stl
    • Seitenruder/Streben_Flgel_zum SR/Platte_Flgel.STL
    • Seitenruder/Streben_Flgel_zum SR/Strebe_oben.STL
    • Seitenruder/Streben_Flgel_zum SR/Strebe_unten.STL
    • Streben _Flgel/Ausrichten_Streben_werkzeug.STL
    • Streben _Flgel/readme_Streben_deutsch.txt
    • Streben _Flgel/STRUT_FRONT_3_6x.3mf
    • Streben _Flgel/STRUT_FRONT_3_6x.stl
    • Streben _Flgel/STRUT_REAR_4_8x.3mf
    • Streben _Flgel/STRUT_REAR_4_8x.stl
    • Streben _Flgel/S_F1_1x.stl
    • Streben _Flgel/S_F2_LEFT_1x.stl
    • Streben _Flgel/S_F2_RIGHT_1x.stl
    • Streben _Flgel/S_R1_1x.stl
    • Streben _Flgel/Thumbs.db
    • wie fange ich an.abw
    • wie fange ich an.txt

Learn more about the formats
Last update 2022-07-25 at 22:08
Publication date 2022-07-15 at 15:59
Design number 783772
bernd1000

bernd1000

3D printer file info

3D model description

Wright flyer 1907

alle Dateien auch in Deutsch.

print a piece of aviation history. this model is useful for technical 3D printing.

either you can make it fly as a real electric RC model.

Print it enjoy the easy assembling with „plug and glue“ in position pattern.

enjoy the scale details, motor, rigging and the filigrane design of the Wright brothers.
explore the different materials when printing the RC Model. use the CURA5 slicer to get perfect results.

the static display model needs only PLA. The RC Model needs for wing, elevator and
rudder the foaming Lightweight PLA stuff to get the possibility to fly. „surface mode“ one wall print, only printable with CURA. With Cura scaleable to a bigger sizes.depends on your printer.

for printers 200x200x200

wingspan is 1m,

static model weight 700 gr.

RC Model weight approx. 450gr.

usefull things : carbon or alloy tube 3mm and 4mm, 1m length

some 2mm flat head tapping screws.

CA superglue medium with accelerator.

strong twine for rigging.

Frame and tail with screws, easy to replace.

https://airandspace.si.edu/collection-objects/1909-wright-military-flyer/nasm_A19120001000

"1909 Wright Military Flyer — Signal Corps No. 1"
Courtesy of Rosebud's WWI and Early Aviation Image Archive, http://members.shaw.ca/flyingaces/archive1.htm

3D printing settings

E-powered model needs 3x9gr. Servo, 2xEsc 12A, 2x Br2211, 2s Lipo Prop 8x6 left/right all servo bays are included in the RC Design.
Printing time approx. 45 h

https://youtu.be/dtZ8MxuePno

https://www.pbs.org/wgbh/nova/wright/flye-nf.html

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.