Formula 1 1994-2017 Keychain

This is a keychain with the Formula 1 1994-2017 Logo. It's a simple design with the logo centered in the middle of the keychain.

This logo is synonymous with F1’s glory days. If you grew up in the late 90s and early 2000s, like me, this is probably the logo most of you remember. Introduced in 1993 and first used for the 1994 season, the logo was created by Carter Wong, a London-based design agency and became a recognisable and much-loved symbol of the sport.

Interestingly, the ‘1’ in Formula 1 isn’t actually found on the red lines on the right but in the white space left in between. Those red lines or ‘speed marks’, helping to create a sense of movement and passion, whereas the use of black on the ‘F’ gave the logo a sense of power.

Regarded as one of the most iconic logos of all time, it wouldn’t last forever… This was the successor Formula 1 Keychain

You can use any material to print this keychain: PLA, ABS, TPU, ASA, PETG, PVA, Nylon,...
You can print it in a single color or do a color change like this:
- White (Layer 0 to 7) 0 to 1,4mm
- Black (Layer 8 to 12) 1,6 to 2,4mm
- Red (Layer 13 to 14) 2,6 to 2,8mm
I recommend using:
White PLA
Black PLA
Red PLA

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at @Frikarte3D

Printer:
Creality Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Color Change:
- White (Layer 0 to 7) 0 to 1,4mm
- Black (Layer 8 to 12) 1,6 to 2,4mm
- Red (Layer 13 to 14) 2,6 to 2,8mm
Thin layers or use small Nozzle (to keep the details of the Number 1)
Filament:
White PLA
Black PLA
Red PLA