Biting dragon

UPDATED

Biting dragon, articulated and with articulated wings!!!

This little dragon doesn't spit fire, but it bites like crazy, especially the fingers.

The body and wings are one piece with no assemblies of any kind, printed in place. When opening the wings for the first time you have to be careful and do it delicately, shelf by shelf, because they have a certain travel and if you force them, the little stops pop out.

3 pieces, plus the eyes.

Very easy to print!!!

Includes a one piece version.

It has small brackets built in at key locations to make printing easier, which then need to be removed.

Use PLA. The bite varies depending on the filament, the stiffer the material, the harder it bites but it breaks sooner, the idea is to find the balance to get the most out of the figure. Using quality PLA, the results are amazing.

Prints at 100% scale so that the mechanisms print correctly. Designed to be easy to print and durable.

Before joining the parts together you need to check that the mechanisms work correctly, see video.

Easier assembly, the eyes act as a joint, you have to use a little glue.

Glass eyes are optional and I would need them 12 mm in diameter.

If you want to sell my designs in a physical way,join my patreon!!!

BEWARE! with some filaments it hurts your finger.

WARNING! If you usually have adhesion problems, you should fix it before printing the body.

Use quality filament in good condition.

Very easy to print even if it doesn't look like it.

100% scale so that the mechanisms print correctly.

3 pieces. Very easy to assemble, the eyes act as a union of the whole figure.

The first layer should come out perfect.

Without supports.

No edges (except for the eyes)

Nozzle 0.4

Layer 0.2

Wall 1.2 or more

Filling 30% or more.

Figure should be robust.

For any problems feel free to let me know.