This is a flexible, articulated horse. It can stand on its hooves and move each leg separately. As you can see in my pictures, it can hold a pose on its own and can even be balanced in a rearing position.
It prints in place, no supports or assembly required, and is PLA compatible.
In addition to the single-color version, I have also included multicolor version that you can see in my pictures. Enjoy :)
Print settings
This model does not require supports, but due to the small contact area of some parts with the build plate, a brim or a raft is highly recommended.
Printed fine for me with generic PLA at 0.2 and 0.3 layer heights. As with any print-in-place design: go slow, make sure you have good first layer adhesion (when in doubt: use a brim or a raft) and your printer is set up correctly for bridging.