Harry Potter Lamp 3D print model

3D MODEL DESCRIPTION Hello friend, today for my profile, I wanted to bring a Harry potter theme lamp, very beautiful, and at the same time very easy to print. Printing requires media, but they are really very few, and above all very easy to print, if you set your slicer with my settings.

The dimensions of the lamp are X120 - Y120 - Z183mm, instead the lens hood X147 - Y147 - Z165mm.

In addition to this project, I invite you to take a look on my profile, there are other very nice projects to print, always themed Harry Potter.

The lamp has been designed to accommodate a lamp holder model E14, with a thread of 10mm, which will go in turn, screwed on the top of the lamp, sliding the cable in the hole I made, which has a diameter of 7mm.

I want to remind you that all my projects that you will find in my cults profile, are interlocking, and all have a tolerance of 0.50mm the standar of all printers, but if you have any doubts about your printer, always in my profile, you will find the Tolerance Test, you can download it for free.

As always I want to thank you for spending your time viewing my project, and if you find it interesting, I suggest you take a look at my cults profile, because you will find a lot of interesting projects, and I’m sure you’ll find something that’s right for you, I’ll also remind you to leave me a like if you appreciate my work.

Good press friend and don’t forget to follow me.

3D PRINTING SETTINGS Layer 0.10 / 0.15 Infill 10% Top and Bottom Layer 4 Perimeter Layer 3 Support Yes View Pictures Speed 50/60 mm/s