Telescoping Display Lightsaber 3D print model

This is a telescoping display lightsaber, partially inspired by Qui-Gon Jinn's lightsaber. This design is not incredibly robust and may break if it is used heavily. For that reason, this is more of a display or prop lightsaber than a toy. This lightsaber was designed to be printed on smaller printers so many of the pieces screw together.

Print Instructions

• Material: PLA or PETG (for extra strength)
• Supports: Yes
  • Middle hilt pieces
  • Hilt bottom
  • Hilt crystal
  • Other pieces may require supports depending on your specific printer
• Orientation: Print everything vertically

Assembly (process shown in pictures)

• Slide the individual blade sections into each other
• Place the blade inside half of the hilt middle and then screw the other half onto the first half, with the blade inside
• Screw the hilt top onto the hilt middle
• Place the crystal inside the hilt bottom
• Screw the hilt bottom onto the hilt middle

Possible Problem

I had immense trouble getting the telescoping blade to work correctly. Even though I think the problems have been solved, if you experience problems, please let me know with a direct message, so I can address the problem.

If you enjoy this model, please leave a like and a comment. If you have any questions, concerns, or problems, please personally contact me.