1/72のR-1820エンジンの模型です。 モデルは写真に基づいて制作しました。 このエンジンはB-17やF2A、SBC Helldiver等に使用されました。 ディテールアップ用に同スケールの飛行機モデルに組み込んだりしてください。 「Type A」と「Type B」の2種類がありますので使用の際はお気をつけください。 写真はポリゴンのイメージと3Dプリンターで印刷して組み立てた見本です。 データには3Dプリンターで出力した完成品は含まれておりません。
印刷解像度の良いレジン3Dプリンターの使用をお勧めします。 印刷する場合は自分でサポートの取り付けを行ってください。 印刷したら組み立て、接着を行い、すべての部品を塗装する必要があります。 組み立ての際はΦ0.1mmのワイヤーが必要なので用意してください。
個人的な使用を目的としています-同意なしに再配布しないでください
2022年 1月19日 OBJファイルを追加しました。
注意! ・このファイルはUV設定をしていません。 ・このファイルはテクスチャはありません ・このファイルはマテリアルの設定していません。
It is a 1/72 R-1820 engine. Was made as a photograph. This engine was used for the B-17, F2A, SBC Helldiver, etc. Become the same airplane model for detail up. There are two types, Type A and Type B, so please be careful when using them. I print the photos with my own image and 3D printing. It was a data 3D printer
Perform Print Resolutions Through the use of resin 3D printing. Print a run on a run. It's a print coating, an adhesive, and all the glue. In that case, please run out of Φ0.1mm wafers.
Personal settings Purpose and consent to use-Please re-speak without consent.
January 19, 2022 Added OBJ file.
caution!