Model Railway - Cable Drum Jack and Stand 3D print model

Cable Drum Jack and Stand.

There are two versions, Jack and a Stand. These have been designed to go with my other items of Cable Drums, but this download also includes the 2m and 1.6m drums with cable and a bar is also part of the design so the drums so it sits on the Jack or Stand. For my other cable drum designs use the following link. https://www.cgtrader.com/3d-print-models/hobby-diy/other/model-railway-cable-drums-with-and-without-cable

These items has been designed at OO gauge, 1/76.2 scale. For HO Gauge print at 87%, 1/87 Scale, For O Gauge UK print at 175%, 1/43.5 scale, For O Gauge International print at 158%, 1/48 scale, For N Gauge UK print at 51.5%, 1/148 Scale, (Caution: I have not test printed this in N gauge scale).

Examples in the photo's were printed on a AnyCubic Photon Resin Printer

I recommend printing these items on a 3D resin printer to get the best resolution print, for larger scales you might be able to print them on a filament printer (Not tested). As per normal with my designs there is a balance between accuracy and printability, hopefully not affecting the design of the model too much.

If you like my designs then please would you support me through my Patreon account - https://www.patreon.com/PJD1974, any money raised helps me research, design and develop new items for me to share. For £1 a month you will give me basic support and for £4 you will get insight into my new designs and be able to contribute with my future projects.

If you would like a particular item that isn't listed here you can request for me to do a project for you via cgtrader.com. Please be realistic.