Carrier Cruiser 3D print model

Kjet Fleet Carrier Cruiser: Or Through Deck Cruiser (TDC) Approx. Size: 100x30x16mm Also: Dual Hangar module. (This will fit this ship, the cruiser and upcoming large ships) Intended for resin printing.

This ships is lopsided compared to the standard cruiser so it only has modules on the one side. It comes with the hangar option but or course modify as you like. Images are of the ship painted.

Scaled to be a similar size to Battlefleet gothic ships or similar table top games

You can also fit other modules designed for Battlefleet gothic imperial ships as they will fit. Suggested: 1x Small turret near the prow next to the runway and 1 x medium turret midway on top.

READY WITH A HOLE FOR A 2MM FLIGHT STAND THAT IS FAIRLY STANDARD. CAN INSTEAD BE FITTED WITH A 4MM MAGNET IF YOU MAGNETISE YOUR STANDS.

With smaller fighter aircraft able to target ship subsystems it quickly became apparent for the need to fleets to have a way to deploy on mass small ships from deep space. Cruisers were quickly modified to allow this to happen by removing all their weapon bays and allowing for extra room for storage and maintenance bays of fighter craft. Radar, additional communications and flight ops have left little room aboard for much else and they need support from other ships to defend themselves.