Punish-Her and Widow - by SPARX 3D print model

Wanted to create a muscular body without the obvious She-Hulk or Power Girl, then it came to me . . A Female Punisher . . Punish-Her . .

This is the second Punish-Her model that includes all parts as listed as well as Widow’s parts to create the full diorama here.

Again I have split the file into two parts; I have made this decision for this and any future models, not to offer NSFW files with the basic model and have the NSFW parts available in a separate download. This allows more people to view my models without having to view pictures of the alternative parts. I hope you all understand my reasons for doing this in future releases. This file contains a non adult model.

There is an NSFW Add-Ons body pack, available contact me for details. A second Punish-Her standing model is available from tghis website. Punish Her - by SPARX

The torso’ and head parts are removable and interchangeable with magnets (see pics) The The parts are interchangeable with the other torso’s and parts available in the both of the add-ons above to create what model you wish . .have fun.

The model is1/6 scale at 250mm sitting

Punish-Her Parts;

2 upper torso’s options (see pictures) 1 Left Arm 1 Lower Torso’s sitting 2 boots 2 heads (and head pin)

Widow Parts; 1 upper torso 1 right Arm 1 Left Hand 2 Lower Torso’s 4 boots 2 heads (and head pin)

Base Parts; 1 x Base box 1 x Base Lid 1 x Base Joint 1 x small ammo box 1 x pallet

25 items in total.

PURCHASE OF THESE FILES DOES NOT ALLOW SELLING STL FILES OR MODELS MADE FROM THE FILES. . . DOWNLOAD IS FOR SINGLE BUYER USE ONLY

I SHARE MY WORK FOR OTHERS TO ENJOY. . .PLEASE DO NOT SHARE THESE FILES ON SOCIAL MEDIA OR OTHER WEBSITES. LINKS TO THIS PAGE ARE ACCEPTED

All parts are cut files to fit build plate of small resin printers like the Photon or have separate files than the FDM versions included. These orientations work for FDM printing but you may find a better orientation that reduces support. All the parts have been printed and developed to print, A lot of prints have been produced to get the figures corrected and fault free.

Why cut into many smaller parts I have been asked?

1. If you try and assemble this, then paint it . .it would be difficult to paint into hidden areas, less masking when painting separate parts.
2. Smaller parts not only allow for Resin print at full scale, but also allow individual parts to use less supports than one larger part on FDM printers So now you know! Please do not scale down or adjust my recommended settings for infill etc. . . as you can see from the pictures this prints very well and I believe you will be pleased with the result when completed. All of my models are only released when they can print! so please do not remix or fix faults in this model then republish! If there is a fault then let me know . . message me I will answer and fix problem. . apart from that print make enjoy.

3D PRINTING SETTINGS Resin Printing; Hollow 2.40 Raft 98% Lower Torso’s, Upper Torso’s, Heads, Boots DO NOT Hollow Arms or Hands

FDM ALL at 0.16 30% fill, speed 50

ALWAYS dry assemble and “trim” parts prior gluing. Look at the picture of how to assemble parts, so that you construct and paint upper and lower parts for both figures separate before joining . ..