Todos mis diseños son creación propia respetando las reometrías de cada simbolo.
Toyota logo Vintage. Extraido de una Van de los 80's. Como recomendación, imprimir a 45 grados, colocar masilla para carrocería y pintar con pintura bicapa. Fabricar en Petg.
Material: PETG Temp extrusión: 240°C vel: 40 mm/s Relleno: 15% Altura de capa: 0,14 Perimetros: 2 6 capas de base, 6 capas de superficie
All my designs are my own creation, respecting the rheometries of each symbol.
Vintage Toyota logo. Extracted from a Van from the 80's. As a recommendation, print at 45 degrees, put body filler and paint with two-coat paint. Manufacture in Petg.
Material: PETG Extrusion temp: 240 ° C vel: 40 mm / s Fill: 15% Layer Height: 0.14 Perimeters: 2 6 base layers, 6 surface layers
Print with the orientation as it is in the file. Decrease printing speed, retraction distance and retraction speed for successful printing.