I bring to your attention the opportunity to feel like an engineer, to manufacture parts, and assembling them into a fully working device! This weather vane is powered by wind power, which makes the impeller blades rotate, and the rear part positions the product strictly on the incoming flow. Stage 1 printing of parts: I used PET-G material, nozzle with a diameter of 0.4 mm, printing modes for other materials may differ. Layer height 0.2-0.25 mm wall thickness 1.2mm bottom / top thickness 0,6mm, Print speed - 40-45mm / s Filling density - 50% Fluidity 99% Supports - from the surface (FOR ITEMS hab1 and vane 2) !!! The rest of the parts are designed for printing without supports !!! Nozzle temperature 230 С Table temperature 75 С vane 1.1 has a technological bead that ensures better adhesion to the hanging table during the process printing a paddle (after printing it can be cut off) The assembly of the device consists of 1. cutting the pipe into a 350 mm part and the part you need for installation on a stationary object. 2.Fixing the 6800rs bearing for mounting hab1 on the pipe 3.securing the bearing 6800rs, installing ring1, locating the 2nd bearing 6800rs, installing ring2
parts for 3d print
purchased parts