Dark Knight Rises Broken Cowl display 3D print model

This is my version of the Dark Knight Rises broken cowl display. It is a full size Cowl with a nice stand ready to print. The cowl should print with very minimal support, mostly just the base of the cowl itself and shouldn't need center support. i've printed the non broken cowl without support in the eyes so this one should do fine there as well if your machine is tuned good.

This is made to fit a 300x300 bed size no problem, if you need it broken down smaller I can but will take some time to get to as i'm usually swamped with getting models loaded onto our grizzly mountain designs patreon.

This should be pretty close to scale but might be on the small side slightly, it's not intended to be worn so shouldn't matter though the cowl can be scaled bigger if wanted.

I will be uploading this and the non broken version as well to my patreon at patreon.com/grizzlymountaindesigns so feel free to check it out for even better deals.

Please, Do not share/resale the 3d model

Please feel free to message with any other questions or reguests! If you like my designs/models check out our instagram Grizzlymountaindesigns or on the patreon, same name!

I do custom models so let me know if there's anything you think would be a good hit!