Star Girls 4 Two Tribes Talon by SPARX 3D print model

CUSTOM LICENCE PURCHASE OF THESE FILES DOES NOT ALLOW SELLING STL FILES OR MODELS MADE FROM THE FILES. . . DOWNLOAD IS FOR SINGLE BUYER USE ONLY

Second Star Girls Diorama featuring Darth Talon and Ashoka Tano. This is part 1 , Darth Talon. Wanted to do something a little different with the light sabres and for a few weeks tried various led’s lights etc, but then settled on using fibre optic loss see pics for info, so I could get the sabres into a 1/6th model. 2 FULL SETS of limbs, torso’s etc for tubed(led/fibre) and solid if you are not using lighting effects are included.

As previous all NSFW options are not included in this model but are available to purchase separately. Contact me for details

The torso’ and head parts are removable and interchangeable with magnets (see pics) including torso’s with fibre optics coupled to legs with JST connectors.

Model is 360mm tall with base.

1 upper torso Modesty tubed 1 upper torso Modesty NOTtubed

1 Right Arm Tubed 1 Right Arm NOT Tubed 1 Left Arm Tubed 1 Left Arm NOT Tubed 1 Blade for sabre (print 2 if not using Lighting)

1 Right Leg Tubed 1 Right Leg NOT Tubed 1 Left Leg NOT Tubed

1 Head NO facial Tattoo 1 Head FULL face Tattoo 1 Head pin

Base Parts; 1 Base for displaying as single model 1 single base logo 1 single base logo and skirt 1 base for adding Ashoka diorama 1 cargo pod for electronics or display 1 cargo pod base

19 items in total.

I SHARE MY WORK FOR OTHERS TO ENJOY. . .PLEASE DO NOT SHARE THESE FILES ON SOCIAL MEDIA OR OTHER WEBSITES. LINKS TO THIS PAGE ARE ACCEPTED

All parts are cut files to fit build plate of small resin printers like the Photon or have separate files than the FDM versions included. These orientations work for FDM printing but you may find a better orientation that reduces support. All the parts have been printed and developed to print, A lot of prints have been produced to get the figures corrected and fault free.

Why cut into many smaller parts I have been asked?

1. If you try and assemble this, then paint it . .it would be difficult to paint into hidden areas, less masking when painting separate parts.
2. Smaller parts not only allow for Resin print at full scale, but also allow individual parts to use less supports than one larger part on FDM printers So now you know! Please do not scale down or adjust my recommended settings for infill etc. . . as you can see from the pictures this prints very well and I believe you will be pleased with the result when completed. All of my models are only released when they can print! so please do not remix or fix faults in this model then republish! If there is a fault then let me know . . message me I will answer and fix problem. . apart from that print make enjoy.

3D PRINTING SETTINGS

Tubed parts print as vertical as possible on plate, check before printing that no supports have filled the tubes!

Resin Printing; Hollow 2.70 Raft 95% Tubed Torso’s

DO NOT Hollow Arms or Right Leg Tubed

Hollow 2.40 Raft 100% Rest of parts

FDM ALL at 0.16 30% fill, speed 50

ALWAYS dry assemble and “trim” parts prior gluing. Look at the picture of how to assemble parts, so that you construct and paint upper and lower parts for both figures separate before joining. ..