ATST Walker for Star Wars The Vintage Collection or Black Series 3D print model

These are the STL files needed to print and build a 1/18th scale, ATST Walker, from Star Wars. By scaling the files at 150% you would be able to make one in the 1/12th scale, such as the Black Series scale.

Other Materials you will need to complete the build • Super Glue • Drill or pin vice - You will want to make small holes to connect the neck and some of the joint pieces - A hand vice works well too • Wooden dowel - 3/16in (can also print this) - To join some pieces that I cut in half to make it easier to print, mostly is just to guide the pieces together and add some strength. • Sandpaper • Small nails to join certain parts - Mostly as a guideline and added strength over just glue

The walker will probably not stand on its own due to the head being too big for the legs. If you glue all the articulation in place then you may be able to get it to stand on its own otherwise, the included stand print is very simple and not overly annoying to look at. There is an included stand that I used to make my own stand.

Of course, if you have any questions about the files, please contact me and I will be happy to answer them for you. Also be sure to check out my Instagram @wattosjunk for more products.