Death Watch Mandalorian Jetpack 3D print model

Death Watch Mandalorian Jetpack 3D modeled in Blender. I have included two versions cut for different printer size (see the picture for reference). Print the large version diagonally if you have a 30x30 print bed and you'll be set. For anything smaller than 30x30 i suggest using the 'small printer' files. Every piece is designed and cut to be printed without support (some parts will probably need to be flipped upsided down, but yes, no supports needed) so it will be a real easy print overall. Every connection can be easily aligned with the included pins so the assembly portion of the job will also be very easy.

Updated: fixed some geometry issues that caused some artifacts in the print with some slicers.

Dimensions (without thrusters): 33cm wide 39cm tall

Suggestions for the assembly: The jetpack is balanced and can stand up on its trusters. To make sure they are glued straight...you can apply the glue, insert the pins and let the jetpack stand on the thrusters while it dries.

For personal use only.

If you have any question feel free to contact me. Enjoy!