Star Girls 1 - Family - by SPARX 3D print model

First up of the Star Wars girls Princess Leia, or Leia Skywalker Daughter of Queen Padme Amidala Skywalker. This model was delayed for Mothers Day in UK but still in time for any Star Wars fans when coupled with Star Girls 2 Family . The two models are too large to upload as a complete diorama and as they come with separate bases and individual posed arms to create a stand alone model, they are offered in this split format. there is a Queen Padme model to complete your “Family” Diorama Star Girls 2 Family - by SPARX from this website.

There is also a NSFW Add-Ons body pack contact me for details.

The torso’ and head parts are removable and interchangeable with magnets (see pics) The The parts are interchangeable with the other torso’s and parts available in both of the add-ons above to create what model you wish . .have fun.

Carrie Fisher is 155cm so body of model is 258mm at 1/6th Scale Model with heels and Blaster on Base is total 330mm

1 upper torso 1 Right Arm with E11 Blaster 1 Right Arm with Hans Blaster Pistol 1 Left Hand for Stand alone model 1 Left hand and Padme Left Arm for Diorama (linking)

1 Lower Torso Dress 2 pairs of boots = 4 x boots 4 heads (and head pin)

Base Parts; 1 x Base

16 items in total.

PURCHASE OF THESE FILES DOES NOT ALLOW SELLING STL FILES OR MODELS MADE FROM THE FILES. . . DOWNLOAD IS FOR SINGLE BUYER USE ONLY

I SHARE MY WORK FOR OTHERS TO ENJOY. . .PLEASE DO NOT SHARE THESE FILES ON SOCIAL MEDIA OR OTHER WEBSITES. LINKS TO THIS PAGE ARE ACCEPTED

All parts are cut files to fit build plate of small resin printers like the Photon or have separate files than the FDM versions included. These orientations work for FDM printing but you may find a better orientation that reduces support. All the parts have been printed and developed to print, A lot of prints have been produced to get the figures corrected and fault free.

Why cut into many smaller parts I have been asked?

1. If you try and assemble this, then paint it . .it would be difficult to paint into hidden areas, less masking when painting separate parts.
2. Smaller parts not only allow for Resin print at full scale, but also allow individual parts to use less supports than one larger part on FDM printers So now you know! Please do not scale down or adjust my recommended settings for infill etc. . . as you can see from the pictures this prints very well and I believe you will be pleased with the result when completed. All of my models are only released when they can print! so please do not remix or fix faults in this model then republish! If there is a fault then let me know . . message me I will answer and fix problem. . apart from that print make enjoy.

3D PRINTING SETTINGS TIPS: Resin Printing; Hollow 2.40 Raft 100% Lower Torso’s, Upper Torso’s, Heads, Boots DO NOT Hollow Arms or Hands

FDM ALL at 0.16 30% fill, speed 50

ALWAYS dry assemble and “trim” parts prior gluing. Look at the picture of how to assemble parts, so that you construct and paint upper and lower parts for both figures separate before joining . ..